Mini Measuring Tape,Mini Tape Measure,Small Tape Measure,Mini Retractable Tape Measure SHANGQIU CHAOYUE MEASURING TOOLS CO., LTD , https://www.chaoyuetools.com
Aluminium and aluminum alloy anodizing industry inspection standards at a glance
Standard number Standard name Equivalent to the use of the international standard ISO label GB8015.1-87 Aluminium and aluminium alloys Anodic oxide film thickness test method Gravimetric method 2016-1982 GB8015.2-87 Aluminium and aluminium alloys Anodic oxide film thickness test method Microscopy 2128-1976 GB8752-88 Aluminium and aluminium alloys - Anodized thin anodized film - Test for continuity - Copper sulfate test 2085-1976 GB8753-88 Aluminium and aluminium alloys - Anodized anodic oxide film - Evaluation of loss of adsorption capacity after sealing - Acid treatment After the stain spot test 2143-1981 GB8754-88 Aluminum and aluminum alloy anodizing Application of breakdown potential test method to check the insulation 2376-1972 GB11109-89 Aluminum and aluminum alloys Anodization term 7583-1986 GB11110-89 Aluminium and aluminum alloy anode Method for the determination of the sealing quality of oxidized anodic oxide films. Admittance method 2931-1983 GB/T12967.1-91 Anodizing of aluminium and aluminium alloys Using a jet mill test apparatus for the determination of the average wear resistance of anodic oxide films 8252-1987 GB/T12967. 2-91 ANODIC OXIDATION OF ALUMINUM AND ALUMINIUM ALLOYS WHEEL Abrasion Test Apparatus for Determining Abrasion Resistance and Wear Coefficient of Anodized Films 8251-1987 GB/T12967.3-91 Cu Addition of Anodic Oxide Films on Aluminum and Its Alloys Acetic acid salt spray test (CASS test) 3770-1976 GB/T12967.4-91 Anodic oxidation of aluminium and its alloys - Determination of the resistance to ultraviolet light of coloured anodic oxidation coatings 6581-1980 GB/T 12967.5-91 Aluminium and aluminium alloys Anodic Oxidation Evaluation of Anodic Film Cracking Resistance by Deformation 3211-1977 GB11250.1-89 Determination of Composite Metal Cladding Thicknesses--Metal Phase Method GB11250.2-89 Determination of Composite Metal Cladding Thickness-X Fluorescence Method GB11250.3- 89 Determination of composite metal coating thickness - Volumetric method GB11250.4-89 Determination of composite metal coating thickness - Gravimetric method GB/T13322-91 Metal coating Low hydrogen embrittlement and cadmium titanium plating GB/T13346-92 Metal cover steel Upper cadmium plating 2082-1986 JB/T5067-91 steel parts powder mechanical galvanized JB/T5068-91 metal coating thickness measurement X-ray spectrometry method <>