ã€China Aluminum Industry Network】 1.6063 alloy is an alloy prepared with aluminum, magnesium and silicon as the main elements. Each element has a certain range of content, and the price of magnesium is high. Plastic Sink Faucet, Plastic Sink Tap, Sink Faucet Plastic, Plastic Wash Basin Taps, Small Plastic Tap Kaiping Jianfa Sanitary Ware Co.,Ltd. , https://www.jfsanitary.com
2,6061-T6 is called aviation hard aluminum, light, high strength, high production cost, so expensive. Is the abbreviation of 6061 aviation aluminum alloy T6 hardening treatment, has good formability, weldability, machinability, and At the same time, it has medium strength and can maintain good operability after annealing. Typical applications Aviation fixtures, trucks, tower construction, ships, pipelines, and other architectural applications requiring strength, weldability, and corrosion resistance field. Chemical composition range: 0.4-0.8Si, 0.70Femax, 0.15-0.40Cu, 0.15Mnmax, 0.80-1.20Mg, 0.04-0.35Cr, 0.25Znmax, 0.15Timax. Higher content of each other component is 0.05, total content of other components is larger 0.15, the balance is Al.
Aluminum 6063 and 6061-T6 Performance Description
Are Plastic Faucets good? If the part where the handle attaches is plastic, don't buy it. It will wear out very quickly. It's going to give you problems and you'll spend way more time repairing this faucet than you would one that may cost more but be made of more durable materials. But plastic faucets market is not small, many countries people still use plastic faucets for more than 10 years, to these customers plastic faucets is very cheap and better than metal faucets.