Wooden Gate Components ,Metal Post To Wood Gate Hinges,Self Closing Wood Gate Hinges,Wooden Farm Gate Hinges Jiaxing Gates Hardware Products Co.,Ltd , https://www.888gates.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Analysis: The method of bearing rust prevention Analysis: The method of bearing rust prevention
1) Appearance hygiene: It is necessary to remove the appearance of the appearance of the rust preventive material and the conditions at the time; select the appropriate method. Commonly used are solvent removal method, chemical treatment health method and mechanical hygiene method. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
2) The surface is dry and cleaned and can be dried by filtered dry compressed air; perhaps dried with a drier of 120~170 °C; it can also be dried with a clean gauze.
Method of applying anti-rust oil 1) Soaking method: Some small items should be soaked in anti-rust grease; let the surface adhere to a layer of anti-rust grease. The thickness of the oil film can be controlled by the temperature or viscosity of the anti-rust grease. Arrivals.
2) Brushing method is used for outdoor construction equipment or special shape products that are not suitable for soaking or spraying; when painting, it is necessary to pay attention not to accumulate; it is also necessary to avoid leakage coating.
3) Spray method Some large-scale rust-proof materials can not be immersed in oil; usually, the compressed air is sprayed at a pressure of about 0.77 MPa in the air. The spray method is suitable for solvent-diluted rust-proof oil or thin-layer rust-proof oil; However, it is necessary to choose a comprehensive fire prevention and labor protection method.
What are the main factors affecting metal corrosion?
Metal corrosion is caused by various connotations and external factors; the main ones are:
1The chemical composition and layout of the metal material itself,
2 metal appearance finish (oxygen concentration difference battery corrosion),
3 with the composition of the metal touch and the pH value,
4 ambient temperature and humidity,
5 various environmental media touched by the metal appearance.
Why does hand sweat cause metal corrosion?
Human sweat is a colorless, bright or light yellow liquid with a salty taste and weak acidity; its pH is 5-6. In addition to being rich in sodium, potassium, calcium and magnesium salts; it is also rich in a small amount of urea. Organic acids such as lactic acid and citric acid. When sweat and metal touch; it will form a layer of sweat film on the metal surface; the sweat film will cause electrochemical effects on the metal; corrosion metal.
People sweating is inevitable; to avoid rust caused by sweat; production personnel should wear gloves, finger cots; or take special parts with tools; do not touch the product with your hands.
Recommend to friends comments close window Bearing related knowledge Bearing quality distinction small common sense
Application of KOYO Bearings Environmental conditions Solid self-smooth bearing analysis Smooth and sealed analysis of characteristic bearings for grease function in motor bearings
This article links to http://
Please indicate the bearing network http://
Previous:The installation of cylindrical inner bore bearing Next: The oscillating bearing is different from the usual bearing
Analysis: The method of bearing rust prevention
Source: China Bearing Network Time: 2013-05-31