T Shape Post,Impact Crusher,T Post Galvanized,Metal T Post Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.hbzhaoxuan.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Assessing methods for bearing replacement Assembling method for bearing replacement
The detailed method for determining whether the bearing should be repaired; that is, the detailed method for the bearing to be fully utilized and the near damage is presented as follows: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1) Using the bearing operation monitoring instrument, such as the iron spectrometer or SPM or I-ID 1 bearing operation monitoring instrument to determine the bearing operation status and when the bearing should be repaired; this is the most convenient and reliable method .
For example, when using the HD 1 type instrument; when the pointer is close to the danger zone by the warning zone; and the pointer does not come back after adopting the method of improving the smoothness, etc.; it can be found that the bearing itself is a problem; at this moment, when the danger zone is not entered; Repair the bearing. After all, it is far from the danger zone to start repairing; it can be adjusted by experience.
The use of such instruments; can fully utilize the potential of bearing operations; repair the bearings in time; and prevent the occurrence of problems; it is safe and economical.
2) Use simple things to monitor in the case where the above instruments are not available; the operator can hold the round bar or the wrench and other things that are closest to the outer casing of the bearing; the ear is ashamed to monitor the sound of the bearing from the thing; It can also be modified with a medical stethoscope.
Normal bearing work sound should be uniform; smooth and not sharp sound; abnormal bearing work sounds have a lot of intermittent; impact or sharp sound. First of all, get used to the normal bearing work sound; then you can master Determine the abnormal working sound of the bearing; then accumulate through the practice experience; further can distinguish what kind of abnormal sound corresponds to what kind of abnormal bearing appearance. There are many kinds of abnormal sound of the bearing; it is difficult to say; Rely on experience.
Recommend to friends comments close window Bearing related knowledge Analyze the cracking failure of the bearing block
The reason for the failure of SKF bearings in the medical field (2)
Characteristics and properties of self-aligning ball bearing products
This article links to http://
Please indicate the bearing network http://
Previous:The following is the installation of the bearing: the method of judging whether "INA bearing can be used"
Assembling method for bearing replacement
Source: China Bearing Network Time: 2012-12-30