3Pc Ball Valve,3 Pc Ball Valve,3Pc Body Ball Valve,3Pc Flanged Ball Valve Wenzhou Dico Valve Technology Co.,Ltd. , https://www.dicovalves.com
First of all, check whether the connecting parts of the spraying machine are firm, and whether the rotating and sliding parts are flexible and reliable. Observe the cursor and check whether the lubricant in the gear box is sufficient.
Then, the sprayer drive motor is connected to the power supply, and the motor is turned. Observe that the rotation direction of the rotating font should be consistent with the direction of the arrow. Otherwise, the power supply should be phase-modulated. The main air line, the lower air line, the upper air line, the vibrator gas line, and the sprinkler water supply cut-off valve are placed in the closed state, and the main air pipe is connected to the air source. The water supply pipe is connected to the water source, and the feed pipe is connected to the host.
Finally, adjust the pressure of the spraying machine, manually pre-pressing, then use a wrench to tighten, bend the feeding pipe, open the main air line, the upper air valve, observe the pressure gauge in the city around 0.3Mpa, rubber plate There should be no gas spillage.
We have to pay attention to a lot of things before starting the operation. The above content is a part of it. Please also know about it, so as not to cause unnecessary trouble.
Before the start-up operation
Reliance shotcreting machine has occupied the primacy in the construction engineering industry and gained people's approval. However, most users did not pay attention to the operation before starting the operation of the spraying machine. Henan Hao Li spraying machine manufacturers introduce the precautions before the start-up operation of the Yuli spraying machine and hope to help everyone safely operate the spraying machine.