The Morse taper shank Drill Bit is a self-locking (or self holding) taper of approximately 5/8" per foot that allows the torque to be transferred to the drill bit by the friction between the taper shank and the socket. The tang at the end of the taper is only for ejecting the drill bit from the spindle, with the aid of a drift.
Its material is high speed steel,treatment process is roll-forged
Taper Shank Drill Bit,Shank Drill Bit,Taper Shank Drills,Twist Drill Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com.jpg)
The arbor of a drill chuck is often a Morse taper and this allows the chuck assembly to be removed and directly replaced with the shank of a Morse taper drill bit.
Boshen Thailand officially opened for production
Abstract On July 23, the opening ceremony of Boshen Thailand was held in Luoyong Industrial Park, Taichung, Thailand. Since the construction started in September last year, Boshen's plant construction and equipment installation have been completed and will be put into production. Chairman Chen Huairong, Secretary of the Chinese Embassy in Thailand, Xiong Ran, Luo Yong Labor...
On July 23, the opening ceremony of Boshen Thailand was held in Luoyong Industrial Park, Taichung, Thailand. Since the construction started in September last year, Boshen's plant construction and equipment installation have been completed and will be put into production.
Chairman Chen Huairong, Secretary of the Chinese Embassy in Thailand Xiong Ran, Mr. Orathep intarasakul, Director of the Labor Security Bureau of Rayong, Mr. Supod Jiamjareekul, Director of the Customs Free Trade Zone, President of the Chamber of Commerce of Chinese Enterprises in Thailand, Mr. Che Jun, General Manager of Bank of China Bangkok Branch, Thailand Mr. Zheng Wenzhuo, the first senior vice president of Kaitai Bank, cut the ribbon for the opening of Thailand Boshen.