In order to "save" the time of boiling water, many people directly used water heaters to burn water at 100 °C. Although this is a very time-saving act, experts reminded friends that the water stored in the water heater may breed bacteria and contaminate the previously boiled water. Therefore, for everyone's health, it is better to save this time. It shows that the water temperature is 100 °C. Can this "open water" drink? Most people install water heaters for the convenience of bathing. To drink water, you usually use a water dispenser, an electric teapot, or buy mineral water directly. Few people will take the water from the water heater, and few people think about it. Some citizens asked: "If the water in the water heater can drink, it is both energy-saving and convenient. Why don't we use it?" "100 degrees is boiling water, I think it should be able to drink, but friends can't say it, the water heater The water is not good, I want to ask the experts, my friend and I, which statement is correct?" Sterilized above 70 °C, but the storage tank is easy to cause circulating pollution Experts pointed out that the purpose of drinking water after drinking tap water is to eliminate the bacteria in the tap water and make the tap water more hygienic. Generally, it will wait until the boiling, that is, boiling, will be safe to drink. But in fact, as long as the fresh tap water is heated above 70 °C, the bacteria inside can be completely killed and it can be drunk. As for the electric kettle, or electric water heater, gas water heater, solar water heater to heat, this has nothing to do with the tap water can drink, in theory, the fresh tap water heated by the water heater can drink. But in daily life, why don't we drink water heated by water heaters? Experts point out that this is mainly because, whether it is a solar water heater or an electric water heater, there is a water storage tank, and the endless water is stored in it. Long may also breed bacteria, so that the previously boiled water is contaminated. Under such circumstances, water cannot be drunk. Moreover, even if the outlet water temperature is guaranteed to be 100 ° C, it cannot be excluded that the plastic material outlet pipe is heated to release the poison. Gas water heaters store less water, but it is too economical to use it to boil water. The water heater related staff pointed out that "we do not recommend everyone to drink." In addition, the staff pointed out the internal structure of the electric water heater and gas water heater. The electric water heater can burn up to 75 degrees Celsius, the cold water enters, the heating pipe heats up, the hot water floats up, the impurities sink to the bottom, and there is a magnesium rod inside, which is used to purify the container. Once the upper layer of hot water is released, the cold water will automatically enter and the temperature will drop. The more hot water is placed, the more cold water enters. In addition, when the electric water heater is not in use, there is still water in the storage. The water is not fresh and is not suitable for drinking. Gas water heaters also have a water storage tank, but its storage tank capacity is not large. After the tap water enters, it can be used immediately after heating, and there is no problem that water does not circulate. It can burn up to 70 ° C. I should be able to drink it. But we have overlooked a practical problem. Usually, when you take a bath, the water is usually set at about 40 °C. To burn the water to 70 °C, it is necessary to consume a lot of gas. This is not worth the economic cost, and it is not worthwhile in terms of the service life of the water heater. The relevant staff also gave the answer of “not recommended to drinkâ€. Their answer is that the heat collecting tubes in the water heater may breed bacteria and pollute the water source. This kind of water bathing is no problem, drinking is not suitable. Concerned about surprises Label: Can the water in the water heater be drunk? Previous: A good "safety lock" for the cooker Next: Dry-hanging granite is compared with traditional wet-laid granite
Magnetic Track accessories are add-ons associated with magnetic track systems that enhance and customize the functionality and performance of magnetic tracks. These accessories can provide more flexibility, convenience and ornamentation, making the magnetic track system more practical and versatile.
Magnetic rail accessories include many types of accessories and enhancements. For example, magnetic track attachments can be various connectors, connecting pieces, or connecting blocks used to connect different segments of magnetic track together to form a longer track system. These attachments can precisely connect the rails, ensuring their stability while simplifying the installation process.
In addition to connection accessories, magnetic track fittings can also include luminaires and lighting components. By adding adjustable lighting fixtures to the magnetic tracks, a softer and more diverse lighting effect can be provided to the space. These lighting accessories can be moved or replaced as needed to help create the ideal light atmosphere.
In addition, magnetic fixture accessories can also include various decorative elements, such as hooks, decorative cover plates, wire management kits, etc. These accessories can not only add to the aesthetics of the track system, but also provide additional practical functions, such as hanging ornaments, hiding wires, etc.
Magnetic Track Systems,Magnetic Rail Accessories,Magnetic Track Attachments,Magnetic Track Fittings,Magnetic Fixture Accessories SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelight.com