Carbide cutting tap processing aluminum alloy and other non-ferrous metal materials use spiral groove taps, cutting light, smooth chip removal; processing cast iron and other brittle materials using straight groove taps, good rigidity, long life; processing high hardness steel, using special groove type and The optimized design of the special tap can solve the difficult problem of high-speed steel taper; the through-hole thread is machined, the blade inclination tap is selected, the chip flows out from the front end, and the rigidity is higher than that of the ordinary straight groove tap, and the service life is also twice as high. Carbide extrusion taps process non-ferrous metals and steels with ductility ≥10. With extruded taps, high-strength, smoother threads can be obtained, and the life of the taps is more than 2 times higher than that of cutting taps. Especially for small diameter thread processing, the life of the extrusion tap will be increased by more than 5 times. Carbide drilling and tapping composite tap processing of through-hole thread with a length-to-diameter ratio ≤1.5 times, cast iron and aluminum alloy material, using a drill-and-drill composite tap before and after drilling, so that the drill bit and the tap can be perfectly combined to improve the drill And efficiency, but also improve the accuracy of positioning, is a good solution. Carbide thread milling cutters, with a wide cutting range and multi-purpose, are the most advanced threading tools.
Electro Galvanized Wire
Electro galvanized wire, also called cold galvanized wire, is made of high-quality carbon steel wire. The processing of this wire is to use electrolytic equipment for galvanizing. In general, the zinc coating is not very thick, but the electro galvanized wire has enough anti-corrosion and anti-oxidation.
Electro Galvanized Wire,Electro Galvanized Coil Wire,Electro Galvanized Spool Wire,Big Coil Galvanized Wire HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.yzironnails.com