Stainless Steel Twill Dutch Weave Mesh, this kind of Woven Steel Mesh is weaved
by a special weave technology, which integrate the
Dutch weave and twill weave. The thicker
warp wire and the thinner weft staggered. Each warp wire shuttles up and down with
the weft wire.
Features: Stainless Steel Wire Mesh screen has the
advantages of smooth surface, high hardness, constant mesh, no deformation,
high temperature resistance, corrosion resistance, flexible network, excellent
filtration performance, good filtration accuracy, high load intensity, high temperature
resistance, low temperature resistance and so on
Material: SS304, SS 316,SS316L
Use: Stainless Mesh is mainly used for gas,
liquid filtration and other medium separation; widely used in precision
pressure filter, fuel filter, vacuum filter, filter material, do aerospace, oil
refining, pharmaceutical, sugar, oil, chemical industry, chemical fiber,
rubber, tire manufacturing, metallurgy, food, health industry and scientific
research.
Specification: The standard roll width: 1m-2m. Standard roll
length: 30-50m.The steel mesh in special width and length can be
produced according to customers` requirements.
Structural drawing:
The warp wire (D1) : all longitudinal
braided lines.
The weft wire (D2) : all horizontal weaving
lines.
Aperture : the distance between two
meridians or two weft.
Mesh number: number of mesh holes per inch.
Thickness (T) : thickness of the wire mesh.
Speciation List:
Twill
Dutch Woven Stainless Steel Mesh
SPEC
NUMBER OF
HOLES PER INCH
WIRE DIAMETER
APERTURE(micron)
80II
20mesh x 250mesh
0.28x0.2
38
120II
30mesh x 300mesh
0.25x0.18
36
200II
50mesh x 500mesh
0.14x0.11
34
320I
80mesh x 700mesh
0.11x0.08
32
320II
80mesh x 780mesh
0.10x0.07
30
360
90mesh x 780mesh
0.10x0.07
25
400I
100mesh x 780mesh
0.10x0.07
22
400II
100mesh x 900mesh
0.10x0.063
20
500
120mesh x 1100mesh
0.07x0.05
17
630
150mesh x 1400mesh
0.063x0.04
16
650
180mesh x 1800mesh
0.07x0.04
14
685
165mesh x 1400mesh
0.063x0.032
13
795I
200mesh x 1400mesh
0.07x0.04
12
795II
200mesh x 1800mesh
0.05x0.032
10
850
2l0mesh x 1900mesh
0.045x0.03
10
1000
250mesh x 2000mesh
0.045x0.028
8
1125
280mesh x 2200mesh
0.036x0.026
7
1225
300mesh x 2200mesh
0.036x0.026
6
1280
325mesh x 2300mesh
0.035x0.025
5
1600
400mesh x 2800mesh
0.03x0.018
3
Stainless Steel Twill Dutch Weave Mesh Stainless Steel Twill Dutch Weave Mesh,Extra Fine Stainless Steel Mesh,Stainless Steel Screen Mesh,Twill Dutch Weave Mesh Anping Xinzheng Metal Wire Mesh Co., Ltd , https://www.sievingmesh.com
The new round of scientific and technological revolution and industrial transformation have formed a convergence with China's accelerated transformation of economic development mode. This has also brought new challenges to China and brought new opportunities. The old topic "Made in China" has also taken on new moves. On May 19th, the State Council officially issued "Made in China 2025" to promote breakthrough development in ten key areas: a new generation of information technology industry, high-end CNC machine tools and robots, aerospace equipment, offshore engineering equipment and high-tech ships, advanced rail transit equipment. , energy-saving and new energy vehicles, power equipment, agricultural machinery and equipment, new materials, biomedicine and high-performance medical equipment.
According to the data of the China Society of Materials, the scale of China's new materials industry has increased by an average of 10% annually, with key materials such as electronic information materials reaching 20% ​​to 30% and biomedical materials reaching 20%. In 2014, China's new material industry scale exceeded 1.60 billion yuan, and the industry developed in a cluster. Three new material industry clusters in the Yangtze River Delta, the Pearl River Delta and the Bohai Rim were formed, and the country's new materials enterprises exceeded 12,000. "The new material is a development trend in the long run. With the advancement of technology, the improvement of the process, the cost will gradually decrease, and the new material will gradually become the mainstream." Yuan Jian said. For the future development of new materials, Tang Jianmao also holds a positive and optimistic attitude. He said that although some key new material technologies have not yet been completely broken, the scope of new materials subject to foreign countries will be less and less, and breakthroughs will be made.
It is understood that the development and application of new materials in China originated in the national defense science and technology industry, and has now initially formed an industrial system with relatively complete varieties of R&D, design, production and application. The production and application technology of some new materials has reached or is close to the international level. Taking graphene materials as an example, the world's first graphene index evaluation published by the National Financial Information Center Index Research Institute shows that the top three countries in the global graphene industry comprehensive development strength are the United States, Japan and China. Among them, Japan and China scored closer. Some industry insiders pointed out that with the joint promotion of policies and industry companies, China's graphene industry is likely to change its role as a chaser in the graphene field, thus achieving "curve overtaking", and in the future it is likely to be the industry leader. Appeared in the international graphene market.
Graphene, as a new material, is just the tip of the iceberg of the development of China's new materials industry. According to the “12th Five-Year Development Plan for New Materials Industryâ€, the average annual growth rate of China's new materials industry during the “Twelfth Five-Year Plan†period is expected to exceed 25%. By 2015, the total industrial scale will reach 2 trillion yuan, which is “11. Three times the end of the five. In this regard, some scholars predict that the future of new materials and other high-tech deep integration, the formation of interdisciplinary, cross-disciplinary, cross-sectoral development. The new materials are more closely integrated with the downstream industries. New materials are integrated with device manufacturing, and the industry chain extends to downstream applications. The products are highly functional, highly functional and multi-functional, and the development and application are more closely linked. As countries around the world join the field of technological innovation, China will also step up and catch up. The development of the new materials industry in China will boost the production and utilization of China's cutting-edge new materials and take the lead in the next round of industry competition. 
China's new materials industry is clustered
Abstract Under the guidance of national policies, the deep integration of a new generation of information technology and manufacturing industry is triggering far-reaching industrial changes, forming new production methods, industrial forms, business models and economic growth points. At present, all countries are increasing their scientific and technological innovation and striving to promote three-dimensional...
Under the guidance of national policies, the deep integration of a new generation of information technology and manufacturing industry is triggering far-reaching industrial changes, forming new production methods, industrial forms, business models and economic growth points. At present, all countries are increasing their scientific and technological innovation, and strive to promote new breakthroughs in the fields of 3D printing, mobile Internet, cloud computing, big data, bioengineering, new energy, and new materials.