Waterproofing is very important in the decoration. It is the problem that every owner has to face. Whether it is a new house or a second-hand house, they must ensure their own waterproof strength so as not to affect their future life. This article excerpts the actual questions and answers from some owners on the waterproofing technology for your reference. Q: I'm going to leap a double, downstairs floor and four walls to be waterproof. Will this waterproof and bathroom and kitchen waterproofing process is the same. What is the specific process? A: It is not the same as the kitchen bathroom. It seems to be used (Polypropylene Polypropylene polymer composite waterproofing membrane, waterproof for the roof of industrial and civil buildings, ground waterproof, moisture barrier, moisture resistance of indoor wall ground) You can go Look for the specific situation in the place where you sell the waterproof material. Q: Is the kitchen's floor and wall waterproofing brushed separately? According to the teacher who told the wall tile, whether or not it was done separately would have an effect on the waterproof effect. The master said that he must first waterproof the walls and then stick the wall tiles. Then do the waterproofing of the ground, then paste the tiles. Will there be any hidden leaks in this process? It is not assured... Answer: 1. It is best not to do it separately, because the ground and wall joints are the most prone to leakage, plumbing fixtures and yin and yang The corners are all around to be reinforced. 2. Closed water test is generally 24-72 hours, it is recommended that the best 2 days or more, so as to see the effect ~ If there is no problem with the closed water test, it can be accepted. Q: The toilet was waterproof yesterday. Today, I saw a wet piece on the wall of the outer wall of the toilet. There is 25 cm on the left side and 5 cm on the right side. Ask the decoration master. He said that he will be soaked in the morning. Whether the walls will be erected on the walls and whether they will be seen tomorrow, or if such a large piece shows that waterproofing is not done well, there are still better ways to detect them. Thank you. Answer: The test of water is too early. It is estimated that it is not dried out. The next day we will see it. There is no water stain on the corner. If so, it may be due to leakage. Conduct a water storage test to see if there is any leakage. Only through testing the water to check, since it is a wall brick wall can cause wet spots on the outer wall, it shows that the water seepage is very serious. Do not urgently paste bricks, and then release water for 24 hours. Hydropower installation hydropower acceptance hydropower reform
Round Pipe Plasma Cutting Machine mainly fit for 3 axis 2D pipe cutting..
1. Mainly fit for Saddle shape cut and round pipe fitting Assembly elements cutting
2. Accept OEM for any pipe cutting diameter and working length.(Normally from 100mm up to 600mm dia.)
3.Accept any materials cutting: Iron plate, Stainless steel plate,Titanium plate,Galvanized sheet, Aluminum plate High speed steel, etc Round Pipe Plasma Cutting Machine Plasma Pipe Cutting,Tube Cnc Plasma Cutting Machine,Round Pipe Plasma Cutting Machine,Cutting Machine Plasma Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnmetalcutting.com Is the bathroom and kitchen waterproofing process the same? 
Is the kitchen floor and the wall brushed separately? 
How to determine if waterproof is done? 
Common problems in waterproofing process
1 2 Next> Total 2 Page
Page to page