Creative Ball Style Ceiling Fan Light Fancy Ceiling Fans,Lowes Ceiling Fans With Remote,Anti Dust Fan,Brushed Nickel Ceiling Fan JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.windfansummer.com
CQB-G high temperature magnetic pump advantages and uses
High temperature magnetic pump is a magnetic clutch (magnetic coupling) to achieve non-contact torque transfer to the static seal instead of the dynamic seal, so that the pump is completely leak-free. Xiao Bian and we introduce CQB-G high temperature magnetic pump advantages and uses. CQB-G high temperature magnetic pump, CQB-G high temperature magnetic pump advantages 1. No need to install the end of the valve and irrigation water. 2. The pump shaft becomes a closed static seal from the dynamic seal, completely avoiding media leakage. 3. Without independent lubrication and cooling water, reducing energy consumption. 4 by the coupling into a synchronous drag drive, there is no contact and friction. Low power consumption, high efficiency, damping and vibration damping effect, reducing the impact of motor vibration on the pump and pump cavitation vibration on the motor. 5. Overload, the relative rotation of the rotor inside and outside, on the motor, pump protection. 6. When the driven parts of the magnetic actuator operate under overload or the rotor is stuck, the main and driven parts of the magnetic actuator will automatically slide off to protect the pump. In this case, the permanent magnet on the magnetic actuator will generate eddy loss and magnetic loss under the action of the alternating magnetic field of the active rotor, causing the temperature of the permanent magnet to rise and the magnetic actuator to slip off. Second, the CQB-G high temperature magnetic pump product use CQB-G series of magnetic pump for petroleum, chemical, pharmaceutical, metallurgy, electroplating, environmental protection, food, film and television printing, water treatment, defense and other industries is the transport of flammable, explosive, Volatile, toxic, rare and precious liquid and a variety of corrosive liquids ideal equipment. It is suitable for conveying liquids without hard particles and fibers with suction pressure less than 0.2MPa, maximum working pressure 1.6MPa, temperature not exceeding 280 ℃, density no more than 1600kg / m3 and viscosity no more than 30 × 10-6m2 / S. Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)