Magnetic stripe & Door Sealing stripe Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com
DT desulfurization pump What are the characteristics?
Desulfurization pump is able to adapt to a variety of conditions of the pump, such as the delivery of acid, alkaline solution or slurry, the pump is resistant to corrosion and wear, the use of a very wide range. Now to say DT desulfurization pump features. DT desulfurization pump DT desulfurization pump Features: 1) strong abrasion resistance: the flow of parts are made of steel-lined ultra-high molecular weight polyethylene (UHMW-PE), ultra-high molecular weight polyethylene (UHMW-PE) The first plastic, nylon 66 (PA66), PTFE high 4 times, is carbon steel, stainless steel wear resistance of 7-10 times. 2) Strong impact resistance: The impact strength of UHMWPE is the first among general engineering plastics, which is 5 times of ABS (ABS) and can work under minus 196 ℃ stable, which is not the characteristics of any Other plastic. 3) Excellent corrosion resistance: The pump can withstand a variety of corrosive media (acids, alkalis, salts) and organic solvents at a certain temperature and concentration range, and soak in 80 kinds of organic solvents at 20 ℃ and 90 ℃ for 30 days. Appearance without any abnormalities, other physical properties almost no change. 4) no noise: UHMW polyethylene impact energy absorption of the highest value in the plastic, good sound-deadening, thus minimizing the transmission of liquid generated during the noise. 5) Safe and reliable, toxin-free decomposition: Ultra-high molecular weight polyethylene (UHMW-PE) used in this pump has extremely stable chemical properties and is therefore also suitable for use in the food industry. 6) low coefficient of friction: the pump's internal friction system is only 0.07-0.11, it is self-lubricating. Under water-lubricated conditions, it has a lower coefficient of kinetic friction than PA66 and POM. When working in a sliding or turning form, lubricity is better than when steel and brass are lubricated. 7) good anti-sticking: Ultra-high molecular weight polyethylene (UHMW-PE) excellent anti-sticking, anti-adhesion capacity and PTFE equivalent, it is conveying some high viscosity medium also outstanding. Further Reading: pump valve pipe Fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)