Cold storage room fast door are used to industrial warehouse applications, our cold storage doors combine the latest technology, premium materials and design features to meet the demanding requirements of the cold storage industry. Available as a sliding, swing and vertical lift door, all Cold Guard doors incorporate a tough and thermally neutral fiberglass reinforced pultrusion framework, extruded plastic polymer casings and Non-CFC foamed-in place polyurethane core. We understand the conditions that cold storage doors must endure. Superior design methods and non-corrosive materials ensure that Cold Guard will perform and look good for years to come!
The advantages of cold storage fast room door
Excellent Insulation Properties
Save Money on Temperature Costs
A Variety of Cold Room Options
Temperature Control and Efficiency
One of the most important benefits of our cool room panels is passive temperature control.
Safety for You Too
Not only are our cold room panels very hygienic, they also allow for superior safety. Their low allergenic qualities and enhanced seismic performance will protect you while you`re at work.
Cold Storage Room Fast Door,Freezer Room Fast Door,Freezer Room Insulated Fast Door,Thick Curtain High Speed Door Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com
Use only the fuel specified on the heater's nameplate.
All flame indicators are extinguished and the heater is allowed to cool before it can be refueled.
When refueling, check for leaks at the junction of the tubing and the tubing. Before the heater runs, any leak must be repaired.
The fuel reserve of the buildings near the heaters must not exceed the fuel consumption of the heaters for one day. A large amount of fuel reserves must be placed outside the building for all fuel tanks and heaters, oxy-acetylene spray guns, welding equipment, etc. at least a minimum distance apart (except for the fuel storage with the heater).
Fuel storage should be limited to places where fuel is not allowed to infiltrate and fall onto a live fire that could cause a fire.
The storage of fuel must be consistent with current regulations.
Do not use heaters where gasoline, paint solvents, or other highly flammable gases are present.
When using a heater, follow local regulations and regulations.
Heater attachments such as water tarpaulins, canvas and similar materials should be placed at a safe distance from the heater. These materials are preferably flame retardant. These materials should be secured securely to prevent them from being ignited or interfere with the operation of the heater due to wind forces.
Use heaters in locations where there is no flammable gas or high levels of dust.
Use only on the voltage, frequency and phase specified on the nameplate.
Engineering hot air fuel refueling matters needing attention
Relevant personnel for fueling must have relevant capabilities and are familiar with the manufacturer's instructions and current regulations regarding the safe refueling of heaters.