We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Magnetic Linear Light,Mangnetic Linear Tracklight,Magnetic Lighting Track,Recessed Magnetic Track Light Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlighting.com
1. Burn the program, use the jumper cap to short-circuit the swing gate control board, connect the serial port communication line, use the dedicated ISP burning software to write the program to the main chip, if the program is accidentally interrupted in the burning process and repeatedly burn Record failed, try to use 5V power alone.
2. After the program is burned, remove the jumper cap and press the reset button. After the control board runs the program, the swing gate must set the initial speed value through the serial port software.
3. When the swing gate control board is powered on, the 24V DC power supply of the power board cannot be directly plugged in. The correct procedure is: when the power board has no output voltage, that is, when the 220V AC is off, the swing gate control is inserted. All connection lines (sensor connection line, motor line, motor and 10-core connection line, etc.) are finally powered directly through the 220V AC gate, and the swing gate control board is powered on. Do not unplug the 24V power strip directly when closing the gate.
4. After setting the initial speed of the swing gate, if it is a double swing gate, after debugging a unilateral swing gate, the two swing gates will be debugged on-line. If the speeds of the two gates are significantly different, you can In the use of debugging software to properly adjust the speed and other parameters of the swing gate, try to achieve the effect of synchronous operation.
5. After setting the speed value of the swing gate, etc., swipe the pendulum to test whether there is any error in the switch of the swing gate motor: A opens the door to the swipe card, and the swinging gate of the swung gate should be rotated counterclockwise to indicate that the motor is steered correctly; otherwise, the direction of the motor socket terminal is Reversed.
Shenzhen Zhongyi Channel provides you with first-class access gates, wing gates, swing gates, three roller gates, and fast track gates. If you need to purchase, please contact customer service on the website or call the hotline to order. We are looking forward to your arrival.
Factory swiping channel switch gate daily commissioning precautions
In the daily use of the swing gate, there may be some faults that require us to carry out debugging. In the following, we will introduce the precautions of the swing gate commissioning.