ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com
Fire pump temperature is too high diagnosis
[Asia Fluid Network News] Fire pump is mainly used in the field of fire protection, environmental protection, water treatment and other departments of the pumping of various liquids, it can achieve a leak-free, non-polluting work environment, its use by the majority of users and favorite. However, such products will have naughty when the temperature is too high is a more dangerous fault, then the fire pump temperature should be how to diagnose it? Fire pump temperature is too high Diagnosis 1, bearing lubrication is not correct or bearing wear can take measures: check and replace as required. 2, axle bending mobile diesel engine fire pump group can take measures: straightening axis or according to the requirements of replacement. 3, coupling or pump and drive misalignment can take measures: check the alignment, if necessary, re-centering. 4, the stress on the pump casing is too large Can take measures to eliminate stress and advice to the manufacturer. After eliminating the stress, check the alignment. 5, too much lubricant can take measures: Remove the plug, so that too much fat automatically discharged. If it is an oil-lubricated pump, drain the oil to the correct oil level. The development of China in the 21st century has drawn the attention of the whole world. Our development can not be separated from the efforts of generations of workers and the hard-working Chinese people. We are proud of these brilliant achievements. At the same time, this is also the driving force for our progress. In the course of the rapid development of all walks of life in our country, we still need to continue to support and speed up the R & D and promotion of related supporting and protection equipment.