High-temperature insulation coatings, as the name implies, are high temperature resistant and have good heat transfer resistance. However, high temperature resistant thermal insulation coating is different from traditional thermal insulation material. It is a new type of thermal insulation material, with the upgrading of materials processing and aerospace, automotive, military, petroleum and petrochemical, metallurgy, electric power, construction and other systems. Production technology innovation, so the performance requirements of thermal insulation materials are getting higher and higher, not only need to work in higher use temperature and more harsh corrosive environment, but also have thin layer, anti-vibration, anti-fatigue, Resistance to sudden changes in temperature and erosion resistance, traditional thermal insulation materials have been difficult to meet the requirements of production and use, with the continuous development of industrial technology, high temperature insulation coatings came into being. The necessary performance conditions for high temperature insulation coatings are as follows: 1. High temperature resistance: The high temperature resistant thermal insulation coating must have a temperature resistance of over 600 °C or a special inorganic high temperature solution unique to Beijing Zhisheng Weihua Chemical Co., Ltd., and the temperature can reach 1800 °C. 2, low thermal conductivity: thermal conductivity coating of high temperature insulation coating can not be higher than 0.06W / mK . The thermal conductivity coefficient of ZS-1 high temperature heat insulation coating is only 0.03W/mK , which is ten times lower than the thermal conductivity of traditional thermal insulation materials, and the thermal insulation inhibition efficiency can reach about 90% . ZS-1 high temperature insulation coating paints 8mm thick coating on the surface of the object at 1100 °C , and the surface temperature of the object can be reduced from 1100 °C to 100 °C . 3, green and environmental protection: high temperature insulation coatings must be inorganic water-based environmental protection, without any volatile VOC and other substances. ZS-1 high temperature heat insulation coating is made of pure inorganic material, non-toxic and harmless, and has no odor at high temperature and normal temperature. 4, high energy-saving rate: high-temperature insulation coatings are heat insulation and energy-saving materials, energy saving rate should reach more than 30% . ZS-1 high temperature thermal insulation coating Zhisheng can suppress the heat radiation and heat conduction loss of high temperature objects and low temperature objects, and can maintain 70% heat loss of the object , and the energy saving rate can be as high as 60% or more. 5, anti-corrosion pressure: high temperature insulation coating must have a certain hardness and corrosion resistance. ZS-1 high temperature insulation coating can protect the substrate from corrosion of corrosion materials, high hardness, pressure resistance, wear resistance and impact resistance. 6, the raw materials are fine: the accuracy of the main raw materials of high temperature insulation coatings is higher than 50 mesh. ZS-1 Zhisheng high temperature thermal insulation coating main components nano hollow microspheres required more than 500 mesh, uniform particle size, ceramic wall thickness difference of less than 5% . 7, high solid content: high temperature insulation coatings are materials that prevent heat exchange, can not be equated with different paints, the solid content is higher than 50% . ZS-1 Zhisheng Weihua high temperature insulation coating has a solid content of over 90% . 8,            Good adhesion: the adhesion of high temperature resistant thermal insulation coatings should reach level 1 , fatigue resistance, heat rise and contraction        Can be good, ZS-1 Zhisheng high temperature insulation coating line expansion coefficient as high as 1 2 × 10-6 . The performance of high temperature insulation coatings is related to the high energy efficiency and the completion of energy saving indicators. China's energy conservation and emission reduction is a long-term, arduous and challenging task, and it is a major issue related to whether human, society and economy can achieve sustainable development. Beijing Zhisheng Weihua Chemical Co., Ltd., as a large-scale enterprise specializing in the research and development of high-tech coatings in China, is also the only manufacturer of high-temperature heat-insulating insulation coatings, high-tech personnel gathering, high investment in research and development, and believes that the company will be able to upgrade the country's industry. , equipment technology innovation, energy saving and emission reduction make a huge contribution, also hope that ZS-1 Zhisheng Weihua high temperature insulation coatings are also constantly improving, to meet the higher requirements of industrial energy saving, performance conditions are more perfect, performance indicators are more outstanding.
SF-202A PRICE SACLE ADVANTAGE:
2.Automatic zero adjustment,automatic shutdown in 180 seconds,power saving function.
3.With counting function.
4.With overload, low voltage battery prompt function.
5.Unique front design, more convenient reading.
Jiangyin Suofei Electronic Technology Co.,Ltd. , https://www.suofeiscales.com