The annual September-November is the season of decoration, and it is also the period of concentration of home appliances. However, how do you install the appliance after it is bought? Especially the kitchen hood. Its installation position, height, and orientation of the outlet ducts can directly influence the effect of the fume extractor hood. How to install a hood to get a good effect of oil smoke? 1. The range hood should be installed directly above the center point of the gas cooker. The distance between the bottom plane and the gas cooker should be within the range of 650mm-750mm. 2, try not to install the hood in the door and window and other places near the strong air convection, so as not to affect the effect of smoke. 3, the outlet pipe should not be too long, it is best not to exceed 2 meters, but also minimize bending, avoid multiple 90-degree bend, otherwise it will affect the effect of smoke. Hoods use common sense 1. When using, normally start the hood 1-2 minutes before opening the gas stove. When starting, it is best to use high-speed gear to start. After starting, you can change the speed of the kitchen smoke according to the size of the kitchen. 2, the gas stove should be directly under the hood, smoking the best. 3, the hood should be completed after the completion of the gas stove is turned off and continue working for 3 minutes or longer, to ensure that the room air for a new one. 4. In use, windows close to the hood should be closed tightly to open the door to prevent the formation of relatively large air convection and to be able to supplement the air in the kitchen. Kitchen Decoration Notice Entrance Decoration Window Supor Room Electrical Zinc Plated Threaded Rod,Threaded Screw Bar Studs Rods,Studs Rods Anchor Clamps Hangers,Right Hand Threads Threaded Rod Handan Jiankun Hardware Products Co., Ltd , https://www.jkscrew.com
Supor Electric