10W Mini Glue Gun Ptc Heating Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of
standards to ensure a robust and long life, we hope it provides you with many
years of trouble-free, safe and reliable service.
General Safety Information:
1. Check
if the plug cord was in good condition, and if there is stand before plug into
the electrical outlet ; Check if the used glue gun has glue flow through back
of the tunnel;
2. wait
5-10 minutes to allow glue to soften, stand up the glue gun on the table when
not in use;
3. Touch
nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop
the nozzle;
4. If the glue could not flow from the nozzle when
the glue gun start to work, check if the glue gun are heating;
If glue
gun can not be heated, there are following reasons:
If glue
gun can be heated, there are following reasons: Nozzle has been stopped by any
impurity, ask careerman to manage it.
5. Do not use the glue gun
under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle
or melted glue;
7. Do not remove out the melted glue stick from
the tunnel back side, it will damaged the glue gun as well as scalding person
hands.
8. Do not to disassemble or assemble any glue
gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it
beyond any of Children palpable side;
10. Only used for melting glue stick, no other
usage;
11. When in use, there are any glue flow back
from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use
after 15 minutes;
Important
Caution:
1．
Before use the glue gun, check
if the plug cord into electrical
outlet properly;
2． When glue gun
in first use, the heating element will have small smoke, it is normal
situation, but the smoke will disappeared after 10 minutes;
3． After power,
not for a long time in standby mode(not longer for 20 minutes), when the
suspension of use, unplug first.
4． Avoid to use
the glue gun under very hot or very cold environments.
5． Better not
work under direct cold wind blowing, it will reduce efficiency and loss power
6． When in
continuous using, do not press the trigger with great pressure, and try to
squeeze out the un-melted glue, it would damage the glue gun
7． Not
applicable for bonding heavy objects or objects needed strong adhesive
8． The quality
of glue stick will directly influence the glue gun function and sticking
objects quality;
9． If the
power cord is damaged, do not replace it by yourself, must ask for
professionals to replace it.
10． This tools must b e placed in its position when
not in use. And storage before the tools complete cooled.
11． Be careful when using any other electrical appliance
with flammable material.
12． Not applicable for a long time in the same
place.
13． Do not use an explosive gas atmospheres.
14． Note that heat may be the line of sigh, combustible
materials.
15． Do not leave equipment unattended when switched
on.
16． This appliance is not intended for use by
persons(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
17. Children should be supervised to ensure that
they do not play with the appliance.
Using methods
1. Glue gun
using voltage is 110-220V AC,50/60Hz;
2. Tip gun
forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm
(mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks
through
4. After power,
wait for 5-10 minutes to allow glue to soften
Mini Glue Gun 10W Mini Glue Gun, Mini Glue Gun, Small Glue Gun, Electric Glue Gun Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com
1
Plug cord into electrical outlet not
properly;
2
Glue gun has been destroyed owing to
inner cord short circuit;
tunnel at back of gun
Huainan will welcome rain and snow, and the dry area still needs protection.
According to the monitoring and forecast by the Central Meteorological Observatory, from January 26th to 28th, large areas of low-temperature rain and snow will occur in most areas south of the Huaihe River in China, including Guizhou, Chongqing, western and northern Hunan, southern Hubei, central and southern Anhui, and central and southern Jiangsu. In parts of northern Zhejiang and other places, there are heavy snow, local blizzards, freezing rains in Guizhou and northeastern Yunnan, and weak precipitation in parts of western North China and southern Huanghuai, which are beneficial to improving soil moisture. On the 29th, the rain and snow in the south will be significantly weakened. On the 30th, the temperature in the south will begin to rise. The precipitation has a certain mitigation effect on the drought in Huanghuai, but it cannot completely relieve the drought. The agricultural drought relief work still needs to be carried out unremittingly. Relevant departments should do a double propaganda work on freezing damage and drought to minimize losses.
In addition, the low-temperature rain and snow process will also have an adverse impact on the Spring Festival travel season, especially in the southwestern region to the middle and lower reaches of the Yangtze River. It is recommended that relevant departments take countermeasures in advance to prevent them as soon as possible.
The specific forecast is as follows:
It is expected that from January 26th to 28th, a large range of rain and snow will occur in the eastern part of the northwestern region and the area south of the Huaihe River to the north of China. Among them, the eastern part of the Qinghai-Tibet Plateau, the eastern part of the northwestern part of China, the western part of North China, the southern part of Huanghuai, the Jianghuai, Jianghan, the southern part of the Yangtze River, and the northern part of South China will have obvious rain and snow (with photos), and most of the above areas will have small to medium rain and snow. Or sleet, in which parts of Guizhou, Chongqing, western and northern Hunan, southern Hubei, central and southern Anhui, central and southern Jiangsu, northern Zhejiang, etc., have heavy snow (5 to 9 mm), southern Anhui and southern Jiangsu There are blizzards (10 to 16 mm); during the period, there will be freezing rain in parts of western Guizhou and northeastern Yunnan. On the 29th, the rain and snow in the south will be significantly weakened.
During the day from the 25th to the 26th, there was no precipitation in the arid regions such as North China and Huanghuai. On the 26th to 28th, there was a weak precipitation process in parts of western North China and southern Huanghuai.
From the 25th to the 28th, parts of northern Xinjiang, the Qinghai-Tibet Plateau, the southeastern part of the northwestern region, the south of the Yangtze River, the northern part of South China, and the southwestern region will cool down by 4 to 6 °C, and the local area will reach 8 to 10 °C. On the 30th, temperatures in the southern region will start to rise.
  Coping suggestions:
First, continue to do a good job in agricultural drought relief and disaster reduction in dry areas. Some areas in North China and Huanghuai will have weak precipitation, which is beneficial to improve soil moisture in these areas, but it is not enough to ease the drought. The meteorological drought will continue. It is recommended that relevant departments take measures to prevent the adverse effects of the combination of freezing and drought on agriculture.
Second, strengthen the cold and anti-freeze of crops to avoid chilling and freezing damage. All localities should strengthen the cold-proof and anti-freezing work of winter crops, facility agriculture, aquatic products, etc., and the southern soil over-wet areas should pay close attention to clearing the ditch and promote crop growth.
Third, coordinate the supply of urban and rural living materials to reduce the impact on the lives of the people. Low-temperature rain and snow weather will affect the transportation of materials in some areas, and relevant departments should make overall arrangements and strengthen material reserves to ensure the effective supply of production and living materials. Relevant departments also need to strengthen the inspection and maintenance of electric power and communication facilities and ice-melting work, and do a good job in maintaining the urban water supply and gas supply pipe network.
Total 1 | <First <Prev 1 Next> Last> |
share to: