Led Flexible Rope Light,Led Neon Flex Rope Light,Silicone Led Rope Light,24V Waterproof Rope Light Tianjin Jinji Optoelectronic Technology Co., Ltd. , https://www.tjjjgd.com
1. To regularly dust.
Outdoor dust is flying high. Over time, the iron display rack will be covered with a layer of dust. It will affect the color of the wrought iron display stand, which in turn will cause damage to the wrought iron protective film. Therefore, the outdoor wrought iron display stand should be wiped regularly, and it is generally better to wipe it with a soft software cotton fabric.
2. Pay attention to moisture protection.
If it is only normal outdoor air humidity, you can be assured of the rust resistance of the wrought iron display stand. In the event of heavy fog, apply a dry cotton cloth to wipe the water droplets on the wrought iron; if it is rainy, dry it in time after the rain stops. Due to the acid rain that has been raging in most parts of China in recent years, the rain left on the iron art should be wiped off immediately after the rain.
Second, the indoor iron display stand also has its own maintenance measures
1. Avoid bumps.
This is the first thing to notice after purchasing a wrought iron display stand. The furniture should be handled with care in the handling process; places where wrought iron is placed should not be encountered by hard objects; once selected, they should not be frequent. Change; The floor on which the wrought iron display stand is placed should also remain flat, so that the four legs of the furniture will be stable and flat. If the shaking is unstable, the wrought iron furniture will be slightly deformed and the service life of the furniture will be affected.
2. Clean and dust.
It is best to use pure cotton knitwear as a rag to wipe the surface of the iron display stand. For the depressions in the display stand and the dust in the embossed ornament, it is best to use a soft wool brush for dust removal.
3. away from acid and alkali.
The acid and alkali that are corrosive to iron is the number one killer of the wrought iron display stand. If the iron display rack is accidentally stained with acid (such as sulfuric acid, vinegar), alkali (such as alkaloids, soapy water, soda), immediately rinse it with clean water and dry it with a dry cotton cloth.
4. Keep away from the sun.
It is best to avoid the direct sunlight outside the window. The wrought iron display stand will withstand the sun for a long time and will change the color of the paint; the colored paint layer will crack and peel off, and the metal will undergo oxidative deterioration. If you have strong sunlight and you cannot remove the furniture, use blinds or blinds to block it.
5. Isolate the humidity.
The humidity in the room should be maintained within normal limits. The display stand should be away from the humidifier, moisture will cause corrosion of the metal, chrome plating produce stripping and so on. When the furniture is very clean, avoid using boiling water to clean the wrought iron display stand. Use a damp cloth to wipe it, but do not rinse it with running water.
6. Eliminate rust.
If the display rack has rust, do not use your own sandpaper. If the rust is lighter and lighter, use a cotton yarn to coat the rust. After a while, wipe with a cloth to remove rust. If the rust has become larger and heavier, you should ask the relevant technical personnel to repair it.
In short, as long as you have mastered the common sense of maintenance, and protect the iron display stand in your daily life, you can extend its life span and make your carefully selected ironworks accompany you for a long time.
Indoor and outdoor iron display maintenance
Outdoor wrought iron display stand maintenance knowledge points: