February 22, 2025

Kitchen Decoration 5 Taboo

>>>Links: Five patterns make the kitchen debut to create excellent quality of life

One, bogey material is not water resistant

The kitchen is a wet place, so the materials on the ground and the operating table should not leak water or seep. The wall and ceiling materials should be resistant to water and scrubbed with water.

Second, avoid material flammable

Fire is an essential energy source in the kitchen, so the surface decoration used in the kitchen must pay attention to fire protection requirements, especially the flame retardant properties of the material should be paid more attention around the stove.

Third, avoid tableware exposed

In the kitchen, pots and pans, bottles, cans and other items are numerous and miscellaneous. If exposed, it is easy to be oiled and difficult to clean.

Fourth, avoid cracks more

The kitchen is a place that is easy to filth. It should be kept as tight as possible. For example, the gap between the cabinet and the ceiling should be avoided as much as possible, because the ceiling tends to gather water vapor or oil stains, and the top of the cabinet is easy to accumulate dirt. The gap between them will become a daily cleaning difficulty. The gap between the pipes below the pool is also not easy to clean, and the door seals can be used to put trash cans or other debris inside.

Fifth, avoid using the mosaic floor

The mosaic is water-resistant and non-slip, but the mosaic block has a small area, many gaps, easy to hide dirt, and it is not easy to clean. If it is used for a long time, it is easy to produce part of the surface and it is difficult to repair. Therefore, it is best not to use in the kitchen.

Kitchen decoration kitchen cabinet door

ISO Standard Mass Flow Meter

Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Meter Coriolis, Flow Meter Coriolis, Mass Flowmeter Coriolis, Mass Meter Coriolis, Meter Coriolis, Flowmeter Coriolis, ISO/ IEC 17025 standard.

Sealand meter is certified by Zhejiang Institute of Metrology. To get such certificate, Sealand has to send all models to Zhejiang Institute of Metrology and all models are tested in their calibration lab. The lab is an ISO/IEC 17025:2005 standard lab approved by CNAS (China National Accreditation Service for Conformity Assessment). CNAS is a member of ILAC (International Laboratory Accreditation Cooperation).


Besides, Sealand has its own calibration lab, equipped with METTLER TOLEDO scales with accuracy 0.014% and the device extended uncertainty is 0.05%. The lab is also approved by Zhejiang Institute of Metrology. This certificate will stay valid only for one year, Zhejiang Institute of Metrology will send their professor to Sealand every year to check and make sure that the lab is qualified still and then issue new certificate. During the production, each meter will be calibrated in this lab for 3 times, each time at 5 different flow rate.

Mass Flow Meter Coriolis, Flow Meter Coriolis, Mass Flowmeter Coriolis, Mass Meter Coriolis, Meter Coriolis, Flowmeter Coriolis

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com