Corded Power Drill,Corded Power Tools,Corded Electric Drill,Powerful Corded Drill ZHENGYANG TECHNOLOGY CO.,LTD , https://www.supraone.com
The second-hand fine stone concrete pump manufacturer Luke Heavy Industry shared with you today about some problems encountered during the construction of the fine stone concrete pump in various places, and how Luke Heavy Industry went to repair it. Through these repair records, users can have a good grasp of what are the failures in the construction of second-hand fine stone concrete pumps, and how to deal with them. With emergency repair experience here, it will reduce a lot of unnecessary trouble.
Second-hand concrete fine stone pump construction site
1. The swing tubing tubing and hopper of the second-hand fine stone pump purchased at the construction site in Anhui produce friction. If there is no inspection on the construction site, the tubing will not break if it is broken. After the master replaces the tubing, it will prevent wear and tear, which will affect the construction and wrap it with cloth, so that it will not affect the construction.
2. The Suzhou Fine Stone Concrete Pump cannot be connected to a straight pipe during floor construction. If it is connected with a 90-degree elbow, it will cause pipe blockage. Luke Heavy Industry technicians use 45-degree elbow joints when repairing, with a small curvature, which is convenient for beating. After 12 elbows are connected, the construction can be completed normally.
3. The fine stone pump motor used in Phase 3 of Zhongnan Century Flower City in Nantong, Suzhou is broken, and the mixing does not work. Luke technicians removed the motor after cleaning, and the linkage shaft was not matched well. Everything works fine.
Second-hand concrete fine stone pump construction site
4. The multifunctional fine stone concrete pump of Bozhou 40b, its speed regulation function can not be used normally. Once the speed is adjusted, the swing cylinder will not swing in place. If the swing cylinder is in place, the speed cannot be reduced. The governor valve at this time becomes a pressure valve. Therefore, the technician adjusted the speed to the position where the swing cylinder can swing, and the construction can be continued without other changes.
5. The cable of Zhejiang second-hand fine stone concrete pump has a layer of broken skin, and the copper wire is exposed. If this cable is not wrapped with electric tape. Pulled to the construction site, once this position, if the water leaks or enters, the fine stone concrete pump will trip directly, the power supply cannot be sent, and the three-phase electric leakage will cause construction accidents. Therefore, the construction staff stripped the cable and repaired the copper wire leakage. Wrap the leaking copper wire with tape and wrap it with 7 or 8 layers before continuing construction.
Second-hand concrete fine stone pump construction site
Old and second-hand fine stone concrete pumps will definitely encounter different problems during the construction process, and Luke Heavy Industry Union will record for you regularly. Luke's second-hand fine stone concrete pump can hit 40 square meters in 1 hour, with a delivery height of 150 meters, free installation, debugging and training. The company sincerely looks forward to the arrival of every customer.
================================================== ================================================== ====== 