As an innovative measuring tool, machine tool probes, reasonable maintenance and maintenance are the basis to ensure its normal function. The maintenance and repair of machine tool probes mainly involve the following aspects. Inner Support Fabric Air Duct,Air Duct Material,Fabric Air Duct,Air Conditioning System Jiangsu Buna Technology Development Co. , Ltd. , https://www.bunaduct.com
1. When measuring parts on the machine tool through the machine tool probe, wait until the parts are completely stabilized. Otherwise, the stylus of the machine tool probe will wear prematurely and lose accuracy, and it will cause an accident.
2. Before the measurement, the stylus of the machine tool probe and the measured surface of the parts should be wiped clean to avoid affecting the measurement accuracy due to the presence of dirt. It is wrong to use the machine tool probe to measure the forged casting blank, or the surface with abrasives (such as emery, etc.), which is easy to cause the machine tool probe to wear quickly and lose accuracy.
3. In the process of using the machine tool probe, do not stack it with tools, tools such as files, hammers, turning tools and drills, so as not to damage the machine tool probe. Do not put it on the machine tool casually to avoid the machine tool probe falling and damaged due to machine tool vibration. When not in use, the machine tool probe should be placed flat in a special box to avoid deforming the stylus.
4. The machine tool probe is a measuring tool and must not be used as a substitute for other tools. Take the machine tool probe as a small hammer, for example. It is also wrong to use the machine tool probe as a toy, such as holding the machine tool probe in your hand and swinging or shaking it arbitrarily. It is easy to make the machine tool probe lose accuracy.
5. Temperature has a great influence on the measurement results. The precise measurement of the parts must make the parts and the machine tool probe be measured under the normal standard. Generally, the measurement can be performed at room temperature, but the temperature of the workpiece and the probe of the machine tool must be the same, otherwise, the measurement result is inaccurate due to the thermal expansion and contraction of the metal material. Do not put the precision machine tool probe near the heat source (such as electric furnace, heat exchanger, etc.), so as not to make the machine tool probe heated and deformed and lose accuracy.
6. Do not put the machine tool probe near the magnetic field, so as not to make the machine tool probe magnetic.
7. When it is found that the machine tool probe is abnormal, such as the surface of the machine tool probe is uneven, there are rust spots, the stylus is bent and deformed, and the activity is not flexible, etc., the user should not dismantle and repair it, and it is not allowed to knock or file with a hammer Repair with rough methods such as filing and emery cloth polishing, so as not to increase the machine tool probe error. If the above situation is found, the user should take the initiative to send it to the supplier for overhaul and verify the accuracy of the machine tool probe before continuing to use it.
8. After using the machine tool probe, it should be wiped clean in time. Except for the stainless steel machine tool probe or those with protective coating, the metal surface should be coated with a layer of anti-rust oil, placed in a special box, and kept in a dry place to avoid Rusty.
9. The machine tool probes should be regularly verified and maintained to avoid product quality accidents due to excessive error of the machine tool probes.
Click http: // to view the detailed information of the EXB machine tool probe.
================================================== ================================================== ======
Consult machine tool probe, please, Miss Zhou.