Water Tap, Zinc Faucets, Kitchen Water Tap, Brass Water Tap, Zinc Water Tap
ZheJiang Haotianchi Sanitaryware Co Ltd , http://www.htc-faucet.com
Luo Baihui, head of the International Association of Mold and Plastic Hardware Industry Suppliers, said that China's rapid economic mold technology has developed rapidly and is close to the international advanced level. Especially since the “Eleventh Five-Year Planâ€, under the guidance of the rapid development of the automobile industry, it has greatly promoted the development of fast economic mold technology, and has turned our fast economic mold technology from serving low-end and small-scale production to serving high-end cars. New model development and various new product developments. Rapid economic mold technology belongs to advanced manufacturing technology. At present, the development and research of China's rapid economic mold technology is basically distributed in colleges and universities, research institutes and high-tech enterprises. There are not many enterprises specializing in research and production of fast economic molds. SME. Therefore, the scale of the fast-moving economic mold enterprises is urgently needed to support the research and development of new fast economic mold technology. The main problems in the field of rapid economic mold are: China's professional rapid mold manufacturing enterprises are relatively few, which has affected the development and trial production of new products of China's own brands. For example, the development of new models of automobiles, most of the mainframe factories choose foreign rapid-production trials of new models, or domestic foreign-funded enterprises. The main reason is that there are fewer domestic fast-moving mold companies, or the development is not strong enough, which affects the automobile OEMs. select. Secondly, China's rapid mold enterprises are mostly small and medium-sized enterprises, and their self-development ability is weak. Although they are close to foreign advanced technology in technology, they have limited ability in technological transformation investment. In recent years, China's rapid economic mold technology has developed rapidly, especially the popularization of CNC processing equipment. The design level and quality of molds have been greatly improved, and it can completely replace imports. However, compared with the advanced foreign rapid mold technology level, there is still a certain gap. After years of technical accumulation and the grafting of new technologies and new materials, the rapid development of automobile cover parts has significantly improved its manufacturing level and speed. Compared with the international advanced level, the gap is mainly reflected in: the international advanced automobile cover rapid mold manufacturing enterprise is a combination of rapid mold technology and automobile body technology, and the development of new products for automobile OEMs, from rapid mold manufacturing and stamping. , welding one-stop service. Domestic automotive cover rapid mold manufacturing enterprises. Can only bear the rapid mold manufacturing and stamping, resulting in a lack of domestic rapid mold companies, the overall level of slower upgrades. In addition, the rapid mold manufacturing enterprises of automobile covers are mostly small and medium-sized enterprises, and their investment ability is weak. The introduction of advanced high-speed processing equipment and online testing equipment is less, and the rapid development of high-end products cannot be guaranteed. Since the advent of rapid prototyping technology, after more than 20 years of development, RP has entered a stage of mature technology and steady development, and dozens of different processes have emerged. China's rapid prototyping technology is not bad. Compared with the international advanced level, the main difference lies in the slower productization and commercialization of research results. At present, rapid prototyping is used as a conversion tool for rapid mold-making technology in China, and it is used in large-scale rapid stamping die for large-scale rapid prototyping technology and equipment. It has not appeared yet. Development goals and main tasks As new products develop faster and faster, new types of materials are more and more, and molding processes are constantly changing, requiring fast and economical mold technology to quickly adapt to changes in new materials. Therefore, the focus of rapid economic mold technology development should be determined according to market demand, technical content, energy conservation and environmental protection, and the development direction of fast economic mold technology. Rapid economic mold is the representative of advanced manufacturing. From the above development status and existing problems, we should focus on expanding the scale of fast economic mold enterprises in the future, and support fast economic mold enterprises to productize and commercialize research results as soon as possible. Therefore, the main objectives and tasks of the rapid economic mold: 1 Through the combination of production, learning and research, improve the productization and commercialization ratio of rapid economic mold research results, and quickly apply the industrialized research results to the new product development project. Improve the independent development capability of our products. Further expand the role of fast economic molds in rapid manufacturing, increase the market share of rapid molds, and increase the current market share of about 20% to more than 50%. 2 Popularize the application of CAD/CAM/CAE technology and fully realize 3D design. 3 Further shorten the rapid economic mold manufacturing cycle, and shorten the speed by more than 20% on the basis of rapid economics. 4 According to the characteristics of the emerging new materials, research and development of rapid prototyping molds. 5In order to reduce the weight of automobiles, save energy, reduce emissions, and develop high-strength steel automobile component forming technology based on rapid molds, the fast economic mold can suppress the girders with tensile strength above 750 MPa, and realize the localization of high-strength steel forming products for automobile components. . 6 To build a national-level rapid economic mold engineering technology research center, establish a rapid economic mold manufacturing base, and rapidly transform the newly developed rapid economic mold technology results into productivity.
Mold enterprises adjust the structure quickly and economically and see results
In recent years, due to the impact of the global financial crisis, Chinese mold companies have been affected to varying degrees. Luo Baihui, head of the International Association of Mold and Plastic Hardware Industry Suppliers, pointed out that Chinese mold companies must face up to this cold reality, actively face difficulties, calmly analyze the situation, formulate strategies, adjust the structure, and undertake business, production and equipment investment for the future. , technical transformation, financing loans and other aspects quickly made corresponding adjustments and take active measures to adapt to the current situation and tide over the difficulties. 1. Pay close attention to industry trends, sales situation and policy trends We must pay close attention to the recent national policies. For example, in order to expand domestic demand, improve life, stimulate consumption, drive production, and promote steady and rapid economic growth, the state has invested 15 billion yuan to implement policy subsidies. In addition to the promotion of “home appliances to the countrysideâ€, the “Steel and Automobile Revitalization Plan†policy will be introduced soon, which is undoubtedly a good news for the home appliance, steel and automobile industries. 2. Strengthening information construction and realizing modern enterprise management China's mold enterprises are mostly small and medium-sized enterprises. They have grown up from workshop-style or family-oriented enterprises. Many private enterprises still have a workshop-style and extensive management model. This backward management level and means have severely hampered the development of enterprises and are unable to adapt to the current highly competitive mold market. Especially in the current severe economic situation, it is necessary to have a rapid response mechanism and adaptability, if there is no advanced set. Information management systems are difficult to implement. 3. Taking the road of production, study and research to enhance the independent innovation capability of enterprises In the face of the fiercely competitive international market, almost all international famous brand enterprises have taken the initiative to stand for their leading products and to provide high-quality services. They have mastered the core technology of the product. We should enhance our ability to innovate independently, and we must follow the path of production, education and research. 4. Forming alliances, professional division of labor, and mutual assistance. On the basis of mutual trust, the company gradually builds a credit system, strengthens cooperation on the basis of mutual benefit, and gradually forms a tactical combination and strategic alliance. Enterprises can undertake business in the name of the alliance, and carry out professional division of labor after negotiation according to the company's situation and their respective characteristics. 5, rapid economic mold technology rapid development With the rapid development of various high-tech, the mold has given a new mission and a new connotation, its classification continues to increase, rapid economic molding materials to the multi-variety series of progress, the process continues to have New innovations and breakthroughs, and the supporting equipment have come out one after another, the service field is constantly expanding, and the economic benefits created are becoming more and more significant.