This is a floor plan of netizens' homes, 88 square meters, two bedrooms and one living room. The decoration budget is 20,000 yuan. Construction starts on December 20. The following is the process of renovation. House plan Because of the choice of gas water heater, it is quite expensive to change water Kitchen tiles, look at the master's level is very beautiful, but still some partial uneven Because there is no balcony, so I had to sacrifice my cloakroom to save some space to come out across the balcony. Closed water test Change the bedroom Swimming tiles Renovation progress: Because all four directions of the toilet must be used: the toilet, the shower, the washbasin, and the washing machine, so the sliding door can only be installed. Two doors are 70 centimeters each. Therefore, the width of the door should be reduced. First build the light brick Then apply expansion bolts to the light bricks This specially reminds everyone that this place must not allow the decoration team to cut corners, and must be marked with expansion bolts, otherwise the walls will not be solid. The ceiling of the house is already well done, but I don’t think it looks good, but I think the basics are no problem, but the key is that the budget is limited. Oh, so only the simplest way is used to separate the functions of the restaurant and the living room. It's OK. The ceiling passed through the aisle, but this place had a problem. It was strange that the lights of the aisle were hung on the side of the suspended ceiling. I haven’t thought about it yet. Whether I installed the light on a suspended ceiling or installed a light on both sides. Construction Acceptance Unit Decoration Space Toilet Gas Water Heater Flat Meter Decoration Living Room Toilet Door Kitchen Sliding Door Bedroom Kitchen Tile Restaurant Ceiling Balcony Tile Bedroom Lamp
Non-tapping screws are machine Screw, the pieceworker to be fastened must be tapped with taps in the screw hole in advance to match the screw threads.
The difference between tooth screws and other screws depends on whether they can be used together with nuts. Tooth screws can be used with nuts. And relative to the screws of other teeth, there are self-tapping screws. The nut of this kind of screw has no bow teeth. As for the standard teeth and fine teeth are only different pitch, it is the nut of the machine screw
Hex Machine screw,pan machine screw,flat machine screw,truss machine screw,Hexagon socket screws Shenzhen Lanejoy Technology Co.,LTD , https://www.grill-mesh.com