Hot Mounting Consumables,Hot Mounting Powder,Hot Mounting Press Machine,Hot Mounting Process TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com
The choice of compression packer compound depends on laboratory objectives and the requirements of final analysis. Many different powders and preformed molds can be used to meet a variety of needs, including colorful universal phenolic powders, hard mineral filling compounds, transparent thermoplastic compounds and conductive compounds for SEM analysis.
Rotary vane vacuum pump features
Rotary vane vacuum pump features: 1. Small size, light weight, low noise; 2. With gas-operated valve, a small amount of water vapor can be removed; in the ambient temperature of five degrees Celsius to forty degrees Celsius, the inlet pressure is less than 1.3X103 Pa conditions to allow long-term continuous operation, was pumping gas relative humidity greater than 90 percent, should open the town valve. 3. With automatic anti-return oil check valve, easy to start; 4. The air inlet continuous flow of air should not exceed a minute; 5. Does not apply to the removal of the metal corrosion, the chemical reaction of the pump oil , Gas containing particulate dust, and oxygen-rich, explosive, toxic gases
Compression fixation compounds use heat and pressure to encapsulate the sample. Compression fixation media include resins, phenolic powders, compression fixation powders and preforms that minimize shrinkage during preparation while protecting and preserving sample edges.