Second-hand house decoration "green" guide

>>> How to fully transform the second-hand housing

Second-hand housing renovation is a systematic project, to reflect the concept of energy conservation in the decoration process, should be considered when buying a house. From housekeeping, design to construction, and through the idea of ​​economy, good results can be obtained. So how to carry out energy-saving renovation, energy-saving decoration it?

The first step: Bring an expert to choose a "thick" house

Second-hand houses are generally renovated by the original owners. Sometimes the decor will cover cracked corners, mold, water leaks and other problems. Therefore, when purchasing a home, it is best to bring a professional decoration supervisor, from the facade to the corridor, from the wall, the ground to the doors and windows, and pipes, and carefully observe every detail.

Understand the overall structure of the house, whether the house has damaged the structure of the decoration, there is no private ride, remodeling caused damage to the main structure. Attention should be paid to the workmanship when checking: whether the wall surface is flat, whether it is wet or cracked, and whether the edge of the wall, window edge, or ceiling is detailed, and whether the drainage system is normal.

A house with a more prominent quality issue will affect the future renovation project and it is recommended not to buy it; if there are only minor problems that can be solved, it can be used as a bargaining chip in the purchase of a house. There are experts in the "eye of the eye" to help guide, select a set of main decoration is basically in place, there is no quality risk of second-hand housing, can save a lot of trouble for the future renovation.

The second step: turning waste into treasure, spending small money becomes bigger

The transformation of a 100 square meter second-hand housing, if the design is reasonable and fully utilized, can save at least 10,000 yuan. Which places can be reused and turn waste into treasure? In fact, the floor, tiles, windows and doors, and even old furniture that were left behind can all be used. If properly reconstructed, you can spend a small amount of money and become bigger.

If you have previously left a good floor style and texture, consider keeping it. During the renovation, the construction workers are required to put several layers of cardboard on the floor to protect them. If you are not satisfied with the original floor, you can use it as a base and cover it with a new floor, which can enhance the moisture-proof effect.

Improvements in doors and windows, if successful, can also save a lot of money. You can decorate the original door, or you can use the original door as a rough door to change the style. Kitchen hanging cabinets or some of the better quality old furniture are also objects of transformation. Re-brushing with paint, or re-applying decorative panels on the outside, and spending a bit of thought and creativity, will be able to "turn into a rotten magic."

Step 3: Use more energy-saving products to change the green home

Energy-saving renovation can be started from the following: replace the original single-glazed ordinary window with an insulating glass window; install a movable external shading device outside the window to reduce the high temperature caused by the direct sunlight; apply a layer of thermal insulation mortar on the inner wall; Windows installed sealing strips and so on. In addition, curtains with dense fabrics, good insulation and warmth, and sealed security doors can also assist in insulation.

In the installation of electrical appliances, it is recommended to use energy-saving lamps, solar water heaters, energy-saving air-conditioning, energy-saving refrigerators and other products. In addition to installing water-saving faucets and water-saving sanitary products, the separation of the wet and dry is also a major point in the water saving of bathrooms. Light tiles and floor tiles can be used in the bathroom, and the use of porous matt bricks will reduce the amount of water used during daily cleaning.

Second-hand House Windows House Renovation Houses Glass Renovation Designs Glass Bricks Glass Furniture Kitchen Doors Flooring Tiles Glass Doors Kitchen Glass Sliding Doors Bathroom Tiles Wet and Dry Separation Bathroom Bathroom Doors Monolithic Toilets Bathroom Designs Bathroom Tiles Toilet Leaking Floor Tiles Kitchen Tiles

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfrollershutterdoor.com