February 22, 2025

Some details that are often overlooked in the renovation process

Renovation, in addition to the overall style of design, color grasp, functional layout, furniture accessories. . . In addition to these important factors, the details of construction methods and processing are of utmost importance and are the key to ensuring the final overall results. No matter how good the design is, how expensive the material is, or if it is not properly handled in detail, it will greatly affect the final results. Now, based on some of your own experiences and experiences, you will talk about some details that are more easily overlooked or less valued:

>>> Link: Door and Window Acceptance Specifications - Wood Doors and Windows

First, door (three doors)
Many people attach great importance to the door of the room at home, and they do not hesitate to pay more for comparison. However, it is often overlooked that very important doors (three doors) are neglected, and even the door covers are not packaged, and the indoor environment is extremely inconsistent. In particular, individual developers are equipped with cheap homes, and the craftsmanship, style, and colors are very good. Bad, great scenery. . . The door is actually the most important one of all the doors in the house. It is the first impression of the entire room decoration, and is often the most important point of sight in the living room and dining room. Therefore, it should be highly valued.
When decorating the door, pay attention to the following points:
1/ Property is allowed to be replaced best and cannot be replaced. The side of the door can be re-painted.
2/ The entire home is white mixed oil, the door can be white, it can be dark oil, but the door cover is best white mixed oil, coordinated with the indoor baseboard. This is a clean and mixed practice. Although the history is long, it still has a sense of fashion.
3/ The door of each room is dark oil, such as walnut, cherry, etc. The color of dark oil is preferred for door and door pockets. If it is white or other light colors, the overall feeling of loss of balance. 4/ If you replace the door with dark oil, it is better to choose the internal steel plate, the outside of the wood veneer, more significant grades.
5/ Do not forget that the door frame of the door has a threshold, which is generally higher than the ground, and it is better to install the door stone too much. In this way, the entire door will be considered complete.

Second, baseboard
In addition to its own function of protecting the walls, the baseboard has a considerable proportion in the proportion of beautiful homes. Is the outline of the home ground, the line of sight will often fall on it naturally. Beautiful shape, exquisite baseboard, can often play the role of four or two, adding a lot to your home. However, the baseboard is also often the place despised by people. Have seen some renovated houses, design, construction can not see what is not good, but that the overall effect is not very good, uncomfortable at the moment, and finally found that all because of the rough and inexpensive baseboard seriously affected the effect.
1/ Door covers and baseboards are best in the same color or the same color. If you can't do that, darker door covers can be equipped with white baseboards. However, it is best not to use darker baseboards for white door covers.
2/ It is not recommended to use the finished skirting board. It is not recommended to use the skirting line given by the flooring business. This is not a discussion of the quality of these finished skirting boards. The main part is the installation process, the stitching of joints, and the chamfering of the bends. The splicing, installation of nail eyes, etc., although looking pretty on the one hand, it is difficult to guarantee the overall result in the end. Although it will be made up with glue, it will still be very conspicuous and it will not feel exquisite. Also, the color of the finished baseboard and the color of the door cover must have a color difference, lacking a sense of integrity. Some of the renovations that have been used by the company have not been effective, and have greatly affected the overall decoration effect.
3/ It is recommended that the kick line be made on-site or purchase semi-finished products.
4/ Whether it is a wooden baseboard or a brick, it must be installed in a straight line. It cannot follow the wall. When dealing with the wall surface in the early stage, it is necessary to require workers to pay attention to the flatness of the wall surface of the skirting line and handle it in advance. If there is still some unevenness in the end, it would be better to use glue to fill gaps, and not to put the skirting line close to the wall. This way, although the gap is not there, the baseboard is not in a straight line and the dragon is distorted. This is a serious flaw.

>>> Links: simple small rustic style white laminated plate cabinet installation

Third, installing wall cabinets <br> Nowadays, it is very popular to make embedded wardrobes or other cabinets embedded in walls. The advantage of this cabinet is that it increases the space inside the cabinet (which can be upright), and It looks simple and generous. Inexperienced classmates may not be able to think of the workers. The walls on the cabinets and the sides of the cabinet must be horizontal and vertical. Otherwise, when the cabinet is installed, it will be difficult to handle the gap, barely fill gaps, and the vision will be distorted, appear rough, and the process will not be precise. The effect will be greatly reduced. An expensive set of closets will be covered by these small details. Destroyed. Also, if it is a sliding door, the ground is uneven and it will cause the sliding door not to close tightly. Therefore, the installation of wall cabinets, floors and walls must be strictly guaranteed horizontal and vertical.
If you have encountered such a problem unfortunately, the wall is ready, it is embarrassing, and the ground is not smooth. What should I do? Tell you a remedy:
The cabinet body is not connected with the original components of the factory, that is to say, do not fix the cabinet body and then insert it into the wall body. Instead, use a thin sponge double-sided tape and glass glue, and simultaneously use the top plate and the bottom plate of the cabinet body. The side panels on both sides are affixed to the corresponding walls, leaving no gaps. After the adjustment is appropriate, the eight corners of the inside of the cabinet are fixed with metal triangle fixtures, and then placed in the main parts of the internal uprights, horizontal panels, horizontal panels and vertical panels, and then fixed with metal triangle fixtures. In this way, the visual error of the entire wall and cabinet cannot be seen, and the problem that the sliding door cannot be closed is also solved. This has an advantage over putting the cabinets in the wall as a whole, which is more convenient to dismantle in the future if needed.

Fourth, staggering <br>We are always picky workers tiling skills, straight lines are not straight, the brick is not in a plane, and so on. However, in the end, the importance of stinging is often overlooked, or it is not particularly clear at all. The quality of the jointing is good for the effect of the tile, like the girl, the imperfections of the features themselves, but do not pay attention to clean the face (of course, this girl is not ah), and serious will not be distorted, you want Think, what will be the result?
In fact, in my opinion, the craftsmanship of the jointing process is handled properly and the workmanship is meticulous. It is the key to the final effect of the wall tile! Even good clinging can make up for some deficiencies in the tiling process. Therefore, it must be done in particular to link the workers. The bricklayers in general are contemptuous of this link. If conditions permit, it is better to supervise the site.
1/ When the entire renovation is nearing the end of the renovation, it should be punctuated to prevent it being dirty by other processes.
2/ Go to the supermarket and buy high quality caulking agent. This money cannot be saved. Poor grouts are not only discolored, but also have poor cohesiveness and are powdered off by hand.
3/ The correct method of jointing, I dare say that more than 70% of the workers do not master, or do not use. Use a wet sea surface, or a damp cloth, or a smooth, circular shape to make the grout and tile almost in one plane. Instead of using a pipe or whatever, as many workers routinely do, draw a groove. The effect of this is that the brick surface and the seaming are a flat surface, the effect is beautiful, and it is not easy to accumulate dirt dust and it is convenient to scrub.
4/ The ground is strongly recommended to choose black grout (or gray), although a good brand of white grout, dirty, you can basically brush the next point, but the premise is that you always have to brush, and brush After that, it is white. Usually, it is neither black nor white, but it is white!

>>> Links: Overhead walls

Fifth, passing the stone and the bay window. <br> The passing stone is used by homes, kitchens, bathrooms and other places. These places are the places we most often enter. I found that some of our classmates were very concerned about the color and quality of the bricks and floors. However, they often ignored the door stone and used very expensive tiles. A few pieces of door stone were reluctant to buy high-grade stone! . Speaking of this issue, I would like to talk about one issue of the proportion of funds allocated to guarantee the overall effect of decoration.
To save money, tiles, floors, walls, cabinets, doors, and so on, are well-designed and cleverly matched. A little cheaper will not affect the overall decoration effect. If you want to save money, these are the big ones. There are plenty of articles to do. Such as the white wall, Libang 3-in-1, Dulux 5 and 1, than China Resources, Fuya and other domestic goods do not see much stronger, the price is a great disparity. The same brand of Libang, "3 and 1" and "Meideli" prices, one in heaven and one in underground. Anti-wear coefficient, anti-mildew, anti-cracking, etc., these manufacturers' propaganda are all added value that we can hardly use. The cracked place will be cracked. After 3 or 5 years, the wall is old. All need to be repainted. Never heard of someone wearing a towel after the wall is old!
Therefore, some areas such as passing stones and bay windows are small, but they are very eye-catching and have an effect. It is worthwhile for us to spend more money. Regarding the variety and color of stone, these need you to balance according to the overall style, or consult with the designer. When some friends talk about the door stone, there is only a dark concept, but it is not.
Say the details of stone edging:
1/ In addition to the European classical style, try not to make complex shapes with edging, expensive and cumbersome, not necessarily look good.
2/ In recent years, it is not very popular to wear round edges, and flat bevel edges are more concise and stylish.
3/ Refuse to edging by hand. Before buying the stone, first say hello if it is a machine cut or a machine edging.

Sixth, lamps
1/ First of all, we must know that light is a master of creating atmosphere and rich in space changes. It plays a much bigger role than a lot of people imagine for an exquisite and beautiful home.

2/ The idea of ​​having a primary light source and an auxiliary light source is required in every room. The main light source refers to the lighting of a specific local space, such as table lamps for reading, floor lamps, chandeliers on the dining table, and spotlights for wall decoration lighting. The auxiliary light source is the headlight in almost every central location. Many people do not have this concept when they are decorating and decorating their homes.

3/ Number of primary and secondary light sources:
In general, the living room should not be less than four, and the number of bedrooms should be no less than three. The kitchen and bathroom should also have a main light source and an auxiliary light source. In this way, the lighting of the space can be layered and not visually monotonous. At the same time, the comfort of living will increase a lot.
4/ Purchasing luminaires requires overall control of the overall home style. A single look is good, not necessarily good-looking. Coordinating in the entire space is really good-looking. Should not say this: "This light is really good-looking," and should say this: "This lamp is good to see here." . .

Seventh, the installation of air conditioners is not known to some students. Normal air conditioners can be used to hang out of the pipes. In this way, you can't see ugly air conditioning pipes in the room. Also, if you think that the air-conditioner wires are ugly, you can design the air-conditioner plug on the top of the air-conditioner so that the following people will not see it. Remember, it is very convenient to buy a socket panel with switch control.

Eighth, the kitchen's outlets are also best equipped with switches. As far as I know, most of the kitchen appliances such as induction cookers, rice cookers, microwave ovens, and coffee machines are used. . . Etc., etc., the instructions on the instructions are "unplug the power after use" prompts for security needs. Pulling in and out is not only inconvenient; even the life of plugs and sockets is greatly reduced, but it is not safe! This is a typical design-oriented problem.

Ninth, glass glue and sandpaper
1/ Since the glass glue was available, the decoration worker was saved! It can be said that at the end of the renovation, most of the defects must be made up of plastic. Be sure to buy it in a big supermarket yourself, and ask carefully for selection according to different uses. High quality glass glue should first be resistant to yellowing. The use of plastic is like repairing makeup. Therefore, when applying plastics, it should be treated like a grout, and the workers at the scene should be looked at as something wrong. Immediately they are asked to clean up.
2/ Sandpaper will be used for carpentry and wall sanding. The number of sandpaper used in each process is technically required. It is recommended to pay attention to whether the number of sandpaper used by the workers is correct. I have repeatedly encountered situations in which workers are not used properly, which has a direct impact on the final results of carpentry or wall paint.

Experience decoration design window space style decoration room living room wall color decoration living room decoration style European pastoral style rustic style living room floor tile white furniture glass table glass dining table kitchen glass sliding door black floor cabinet cupboard door classical furniture glass sliding door closet door glass door Simple Furniture Glass Tiles Cabinets Doors Glass Cabinets Crafts Glass Furniture Kitchens Sliding Doors Closet Cabinets Kitchen Cabinets Floor Lights Continental Bathrooms Bathrooms Sliding Doors Bathroom Tiles Bathroom Doors Bathroom Tiles Colors Overall Bathrooms Toilet Designs Bathroom Tiles Bedroom Lamps Dining Room Furniture Continental Home Tiles Tiles Premium Tiles Home Furnishing Tiles Price Bedroom Wardrobe Kitchen Tiles Small Bedroom

Simple Bathtub

Simple Bathtub

Simple Bathtub

Guangzhou Aijingsi Sanitary Products Co.,Ltd , https://www.hottubdesign.com