The first step: first open the safe door, then turn the switch dial counterclockwise, and turn the lock mark to the position of the switch indication line. Want to learn more about the knowledge of the safe, all in the Chinese safe exchange network. Chain Block 1 Ton,Chain Come Along,Chain Pulley Block,Chain Block 2 Ton Guangdong Gongyou Lift Slings Machinery CO.,LTD , https://www.wmpallettruck.com
Step 2: Turn the password dial counterclockwise. When the password scale “*†is turned 4 (or more than 4 times) to the replacement password indicator scale, the alignment stops. (If you turn it, please don't return it, but you can stop it after another round)
Step 3: Turn the password dial clockwise, and stop at the password scale. (If it is over, please don't return it, you need to restart it from the second step, otherwise it will lead to wrong password change)
Step 4: Turn the password dial counterclockwise to stop accurately when the password scale line “*†turns the password indicator mark for the second time. (If it is over, please don't return it. You need to restart it from the second step. Otherwise, it will lead to the replacement of the wrong code.
Step 5: First replace the code key to insert the keyhole behind the door; then rotate the replacement key clockwise by 90 degrees; in the process of changing the password, use the key to maintain this state.
Step 6: For example, the new replacement password is 96, 11, and 23. Turn the password dial counterclockwise to stop the alignment when the new password scale “96†reaches the replacement password indicator mark the fourth time (or more than four times). (If you turn it, please don't return it, but you can stop it after another round)
Step 7: Turn the password dial clockwise, and stop at the third time when the new password scale “11†goes to the replacement password indicator scale. (If you turn it, please don't return it, you need to restart it from the sixth step, otherwise it will cause the replacement password to be wrong)
Step 8: Turn the password dial counterclockwise to stop when the new password scale “23†turns to the replacement password indicator scale the second time. (If you turn it, please don't return it, you need to start again from the sixth step, otherwise it will lead to wrong password change)
Step 9: Rotate the replacement key 90 degrees counterclockwise; replace the key to restore the original position; pull out the replacement key.