Roof waterproof structure design, due to consider the structural deformation, temperature deformation, shrinkage deformation, vibration and other influencing factors, need to be easily deformed parts such as deformation joints, sub-grid seams, roof ridges, cornices, gutters, water falls, entrances and other key Additional reinforcement is provided for the site. In order to enhance the ability of the waterproof layer to partially resist damage and aging, the entire waterproof layer is synchronously aged. The material for the additional layer may be one or more layers of the same material as the waterproof layer, and may be reinforced with other waterproof materials. Generally need to add additional reinforcement layer of the site, the shape of the grass-roots layer is more complex, it is appropriate to Waterproof Coating or sealing material brushing or scraping. Frequent rain, frequent walking wear, serious wear and tear, large local deformation, and other parts that are easily damaged by aging, such as gutters, gutters, cornices, around water pipes, under and around equipment, access to facilities, underground buildings and tank floor The joints with the main wall, deformation joints, etc., can be used for a certain thickness of the paint reinforcement layer or add 1 to 2 layers of reinforced sheet. The thickness of the additive must be determined depending on the severity of the damage that may have occurred and the extent of the waterproof material used. The places where structural deformation occurs are concentrated, such as plate-end joints, intersections between trenches and roofs, deformation joints, and flooding at the junctions between planes and facades. The empty storey should be reinforced. The width of the empty store depends on the elongation and tensile strength of the material. Generally, it is selected between 100 and 300mm. Purchase material aisle ceiling living room ceiling paint One-component Exposed Water-swellable Polyurethane Sealant is a solvent-free one-component sealant.The Sealant is in paste form and can be squeezed out or applied by spread.Sealant is a material used to fill voids (holes, joints, seams, etc.) and has both the functions of bonding and sealing.Adhesive to metal, rubber, wood, cement components, ceramics, glass, etc.After curing, it has water-swelling properties, which can achieve sealing and secondary water-swelling properties, and has the effect of repeated water-stopping. Water Swelling Glue,Foam Water Sealant,Water Resistant Foam Sealant,Spray Foam Water Sealant Suzhou Smart Building New Materials Co., Ltd. , https://www.srdwaterproofing.com
.
Name family integrated ceiling