Compared with anti-static fabrics and other fabrics, in terms of specific use, the conductive filaments in the conductive silk fabric are mainly embedded on the back of the fabric to facilitate the appearance and flatness of the fabric. The back of the fabric is a semiconductor, and the front surface of the fabric is an insulator. Therefore, after the garment is made, only the static electricity generated by the friction between the garment and the human body is eliminated, and static electricity generated by friction with the external equipment cannot be eliminated, and the front surface of the garment is still charged. Because the blended fabric is a conductive fiber added to the yarn in the textile process, the front and back of the fabric belong to the semiconductor, and the positive and negative charges on the surface of the fabric can be conducted and cancel each other out, and can quickly and uniformly eliminate the production of human body and clothing. The static electricity, as well as the contact with the outside world by the static electricity generated by the clothing surface, clothing has no charge accumulation. In oil, petrochemical, refining, chemical and other industries, the main purpose of wearing anti-static clothing and related protective equipment is to eliminate static electricity generated by the outside world and the human body, while avoiding the accumulation of electric charge and eliminating safety hazards caused by sparks generated during electrostatic discharge. Therefore, in most high-risk industries, the protective performance of blended anti-static fabrics has been accepted. The use of blended anti-static fabrics not only improves the anti-static performance, but also reduces the security risks. Flexible Diamond Dot Sanding Disc Diamond Dot Electroplated Abrasives Magentic Disc are precision abrasives products,This product is a thin solid sheet of springy metal, with dots of diamond abrasive electroplated directly to the base sheet.We use 100% diamonds electroplated onto the surface with nickel. This creates a highly durable, rust free disk for all your grinding needs. The back of the disk has a rubberized magnetic applied to it which allows for easy application to the metal wheel head of your grinder.This magnetic system makes changing from one grit to the next extremely easy. Our Diamond dots cannot pull up or fall off to create bare sections or cause cutting or gouging of the material. The thin metal backing helps the abrasive lay flat and produces a even sharp facet or bevel when required and prevents uncontrolled scratching of the finished surface around the area to be worked.Diamond Disk only 1.7mm thickness with magnetic backing, It easily rectify the distortion of disc and flat attach it to plates of grinder. Flexible Diamond Dot Sanding Disc,3M Roloc Flexible Diamond Disc, Flexible Diamond PSA Disc,Diamond Flat Lap Disc Hans Super Abrasive Diamond Tool Co.,Ltd , https://www.hansuperabrasive.com