Arden Bathtub,Adult Massage Bathtub,Freestanding Bathtub,Acrylic Bathtub Foshan Guanyu Group , http://www.guanyu-group.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Two smooth methods for NSK bearings Two smooth methods for NSK imported bearings
1. The spray is smooth and mixed with sloppy compressed air by a sprayer to form an oil mist; erupted in the NSK bearing; the air flow can effectively cool the bearing and avoid the intrusion of impurities. This method is suitable for the smoothness of high-speed, high-temperature bearing components. Is a very common smooth method. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
2, oil bath smooth oil bath smooth is the most general smooth method; suitable for low and medium speed bearings smooth. Part of the NSK bearing immersed in the groove; smooth oil from the rotating bearing parts; then flow back to the oil tank The oil level should be slightly lower than the middle of the lowest roll.
Recommend to friends comments close window Bearing related knowledge Sliding bearing primary faulty rule Rolling bearing type of selection of imported bearings and other parts of the bearing micro-disadvantages and micro-defects of bearing steel how to measure the temperature of SKF joint bearing
This article links to http://
Please indicate the bearing network http://
Previous:How to disassemble the bearing of the vibrating screen Next:The appearance of the IKO bearing temperature is too high and the disposal method
Two smooth methods for NSK imported bearings
Source: China Bearing Network Time: 2013-08-31