Ceramic tiles account for the majority of home improvement, especially in the kitchen and bathroom. In order not to damage the tiles during transportation or construction, a layer of film is generally placed on the surface of the tiles. However, if this film is stuck for a long time, it will be difficult to tear, then, what if the tile film is difficult to tear ? What are the maintenance methods for tiles? The following editor will give you a detailed explanation. What to do if the tile film is difficult to tear after a long time 1. What should I do if the tile membrane is difficult to tear after a long time? We can remove this layer of film with Xieling. First pour a few drops of detergent on the tile film, and then soak the tiles in warm water for a few minutes. It will be easier to tear off the film on the surface of the tile. If there are still some stubborn films, use a spatula to carefully remove the film Film removal. 2. What should I do if the tile film is difficult to tear after a long time? If the surface film of the purchased tile has been damaged and is not easy to tear, you can use banana water to remove the film. First apply banana water to the surface of the tiles, and then gently wipe off the surface film of the tiles with a steel ball. If there is still some film left on the surface of the tile, you can put a hot treasure on the surface of the tile, wait for the film glue to melt, and then clean it with a small spatula. 3. What should I do if the tile membrane is difficult to tear after a long time? There is another easiest way to remove the membrane with boiling water. First, we need to clean the surface of the tile, and then wipe the surface of the tile with boiling water 2-3 times. The film will soften after high temperature, so it is easier to separate from the glaze. At this time, the film can be torn off from the corner of the tile. If it is still difficult to tear off, you can use asphalt cleaner to remove it, so that the film on the surface of the tile can be completely cleaned. 4. What should I do if the tile film is difficult to tear after a long time? We can also use industrial alcohol to remove the film on the surface of the tile. Industrial alcohol can not only remove the film on the surface of the tiles, but also remove the stains. After these are cleaned, wipe them with a soft cloth. What are the maintenance methods of tiles 1. If you want to use the tiles as bright as new, you must wax the tiles regularly, this is the main maintenance method. Generally, the waxing time of ceramic tiles is once every 3 months, which can increase the stain resistance and waterproofness of ceramic tiles. 2. In addition to waxing the tiles regularly, they also need to be cleaned regularly. If there are stains on the tile surface, you can clean it with freshener. For example, where there is ink, you can use toothpaste to clean it. If there are stains such as beer and coffee, you can use detergent, detergent, etc. to clean. 3. In order to make the ground more clean and tidy, and in order to make the service life of the tiles longer, the ground should be cleaned as soon as there are stains on the ground. Summary of the article: What should I do if the tile film is difficult to tear after a long time ? The editor of the above content has explained in detail. You can refer to the above method to remove the film on the surface of the tile. If you want the ceramic tile to last longer, you must regularly wax and clean the ceramic tile, but you must pay attention to the method. You cannot use sharp objects to scratch the surface of the ceramic tile to avoid damage to the ceramic tile. What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount Wood Laminated Melamine Sheet,3D Wood Fiberboard Veneer Wallboard,Fiberboard Veneer Wallboard,Pet Wood Veneer Wall Panel Shandong Zeen Decoration Materia.Co., Ltd. , https://www.zeendecor.com
