The construction process of white latex paint and other paints is different in many places. If you need to pay attention to the decoration, the following Xiao Bian will give you a brief introduction. What should be paid attention to in the construction of white latex paint, hopefully it can help you? . White latex paint construction 10 major matters needing attention First, when operating the adhesive, the operating temperature should not be less than 7 °C. Second, white latex paint is not resistant to high temperatures, more than 95 °C, will lead to lower adhesive layer strength. Third, according to different uses, can be diluted with water, but the need to warm the product to more than 30 °C, and use more than 30 °C water slowly added to the mixing can be used, not diluted below 10 °C cold water. Fourth, after the start of use, the white latex cover should be tightly capped, in order to prevent the skin, can be sprinkled with a layer of water, stir evenly when used. 5. Before use, add a little hydrochloric acid to increase the curing speed. Six, can be mixed with other water-repellent resin into two-component products, improve product bonding strength, water resistance and heat resistance, shorten the curing time. VII. The product is generally safe but cannot be swallowed or splashed in the eyes. If you accidentally touch the mouth or eyes, rinse immediately with plenty of water. 8. Do not pour this product into rivers or sewers so as to avoid pollution or obstruction of sewers. After use, the residue shall be left to stand and be stored as a solid waste after being dried and filmed. Nine, the main components: polyvinyl alcohol, vinyl acetate, additives. X. Storage and transportation: Must be stored in a cool, dry, and above 5°C environment. The shelf life of tight cans is 12 months or more. Storage and transportation should be light and light to prevent inversion, extrusion and exposure. White latex paint construction 10 major attention you have mastered it? Understand this knowledge will greatly help the decoration, I hope you can enjoy the introduction of Xiao Bian, if you want to know other relevant information, please continue to pay attention to this site, more More exciting so stay tuned! Latex paint latex paint wall paint From the extrusion process, it can be seen that the Screw operates under high temperature, certain corrosion, strong wear, and high torque. Therefore, the screw must: Threaded Rod,B7 High Strength Screw,Special ASME Full Thread Bolt,High Strength Low Temperature Studs AM FASTENER , https://www.asmefastener.com
1) High temperature resistance, without deformation at high temperatures; 2) Wear resistance and long service life; 3) Corrosion resistance, materials with corrosiveness; 4) High strength, capable of withstanding high torque and high rotational speed; 5) Having good cutting performance; 6) After heat treatment, the residual stress is small, and the thermal deformation is small.