With the strengthening of environmental awareness, the wooden door industry has developed rapidly. Therefore, how to install wooden doors, solid wood door installation methods, and installing wooden doors need to pay attention to what issues are of great concern. We will then look at them together. See it. How to install wooden doors Before installation: There is a little secret here: In a limited space, the higher the door, the better it looks. Especially the wooden doors with decorative lines, the doors are short, and the proportions are not so coordinated. It certainly does not look as good as the exhibition hall. 1. The wooden door must first be horizontally placed on the ground before installation (the stacking height should not exceed 1 meter), and do not lean against it to avoid deformation. 2. Try to avoid prolonged exposure to sunlight outdoors to prevent the doors from being heated. 3, to prevent the doors from being hit or contact with corrosive substances. 4. Before installation, the door opening must go through the necessary moisture protection and anti-corrosion treatment. After installation: 1. The door leaf should be closed under normal conditions. 2. If the humidity and temperature of the environment on both sides of the door body are greatly different, the door leaf should be kept open to prevent the door body from being deformed due to the uneven humidity and temperature on both sides. 3, in use, if the hinge, door locks and other loosening should be tightened immediately. When the hinge makes a sound during the switch, oiling is required. 4. When opening the door lock and turning the handle, please do not use too much force, so as to avoid the use of improper and reduce the service life of the lock. Matters needing attention when installing wooden doors 1. After measuring the water on the door leaf, wipe it clean with a dry cloth immediately. 2. When the facade is stained, wipe it with a soft cloth. The use of professional wood products can extend the service life of wooden doors. 3, preparation tools: hammers, rulers, wood (brick) blocks, ropes, pencils, Meisen force door covers, special sturdy connectors and so on. 4. Remove dust: Before installation, place bricks, remove old powder or lime, and leave the original brick wall or concrete wall. 5. Place the wooden bricks: coat the wooden tiles with special glue, place the cover plate and the wall, and fix the wooden bricks and the cover plate with small nails. 6, install the door edge line: After the foam rubber curing (usually 2-3 hours), dismantle the triangle on the cover plate 7, bracket, the actual size of the door line after the blanking, the sleeve groove coated with special glue, after the door line and the door sleeve, plate gently tap and fix. (If the door line and the groove are loose, use the veneer inside the door line). In order not to affect the overall appearance of the wooden door, before and after the installation of the solid wood door, its protection measures are also very important! The above is related to how to install the wooden door and solid wood door installation methods and precautions collected by Xiao Bian. I hope to help everyone. Wooden door installation Grille Linear Light,Led Trimless Modular Light,Grille Light,Led Recessed Linear Light Foshan Brinno Technology Co.,Ltd , https://www.brinnolighting.com
