x49w-16P glass tube level gauge instruction manual
We supply various Anti - Radar Earth
Protection products, including Thunder Arrester, Earthing Rod, Porcelain
Shackle Insulator, Terminal Block Connector and Parallel Groove Connector etc.
If you want to know more about the products
in Anti - Radar Earth Protection, please click the product details to view
parameters, models, pictures, prices and other information about Parallel
Groove Connector, Thunder Arrester, Earth Rod, Terminal Blocks.
Whatever you are a group or individual, we
will do our best to provide you with accurate and comprehensive message about
Anti - Radar Earth Protection products.
X49W-16P glass tube liquid level gauge is a widely used instrument product. The glass tube liquid level gauge has simple structure, small volume, light weight, low material consumption, small installation size, and easy and quick operation. The glass tube liquid level meter produced by our factory has stable quality, complete varieties, strong technical force, perfect testing, and a group of high-level technical team. It is a modern enterprise integrating glass tube liquid level meter research design and sales, glass tube. Liquid level gauge products are widely used in municipal construction, farmland water conservancy, thermal power generation, petrochemical, metallurgical mining, fire protection, food, shipping, medicine and textile, etc., are the main technical parameters: model X49W-16P series name Glass tube level gauge Nominal pressure 1.6 (MPa) Nominal diameter 500～2000(mm) Nominal length 440~600(mm) Medium temperature ≤250°C main material Q235-A carbon steel ICr18Ni9Ti stainless steel " target=_blank> stainless steel
Specifications and basic parameters
Nominal length L (mm)
Light transmission length L 0 (mm)
other
A
B
R
500
350
90
twenty two
20
600
450
700
550
800
650
900
750
1000
850
1100
950
1200
1050
1300
1150
1400
1250
Material classification
Serial number
name
material
I
II
III
1
Glass tube
BSi
BSi
BSi
2
Ruler
LF21
LF21
PP
3
Needle valve
20
1Cr18Ni9Ti
PP
4
protective case
A 3
1Cr18Ni9Ti
PP
x49w-16P glass tube level gauge installation instructions:
Nominal length (L)
Allowable tolerance: ≤1/1000 (full length ≤3mm)
Flange center connection line plumbness: ≤ 4/1000
Flange connection hole distribution shape: square â–¡
Steam interface size: M16 × 1.5 (internal thread)
Maximum vapor pressure: 0.6MPa
The maintenance of the x49w-16P glass tube level gauge is also very important, mainly including the following three points:
1. Regularly check the level gauge in use. Clean the dirt on the inner and outer walls of the glass to make the liquid clear.
2. In order to ensure that the dynamic density of the sheet exceeds the planned effect, the medium pressure in the container should be greater than 0.2 MPa. When the upper and lower valves are opened, the valve stem exits at a number of revolutions of not less than 4 revolutions (so that the steel ball is not closed when the door is closed) top.)
3. The end faces of the two flanges connected to the glass tube level gauge on the container should be in the same vertical plane. Otherwise, the valve will be deflected after the level gauge is installed, so that the glass tube is broken.
Through the above information, even the layman will know a little about the glass tube level gauge. The important thing is not only to use, but also to maintain it regularly!
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Parallel Groove Connector, Thunder Arrester, Earth Rod, Terminal Blocks
NINGBO LONGFLIGHT INTELLIGENT TECHNOLOGY CO.,LTD , https://www.long-flight.com