Application and protection of slewing bearings

Home>Bearing knowledge>Application and protection of slewing bearings
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";
Application and protection of slewing bearings
Source: China Bearing Network Time: 2018-04-02
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
3.1 Check the bolts and abnormalities of the device. After about 100 hours of operation, check the pre-tightening torque of the bolts of the inner ring and the outer ring device; look at it once every 500 hours.
If it is used, it will show abnormal phenomena such as noise, impact and power increase; it should be stopped and inspected.
3. 2 smooth slewing bearing behind the device; according to the actual application conditions; fill the appropriate smooth grease; and should fill the bearing while filling the edge to make the smooth grease evenly distributed; until the new grease starts to squeeze the sealing lip to stop. 50~ per distance Filling once in 100 hours; in the higher environment and more dusty conditions, the grease filling cycle should be shorter. It is necessary to add new smooth grease before and after the machine is stopped for a long time.
3. 3 The slewing bearing shall be removed and installed with the installed slewing bearing; the sleeve and the sleeve and the parts between the column and the column shall not be exchanged. When the bearing is dismantled and removed, it shall be carried out according to the bearing installation drawing; the upper and lower halves shall be set. The ring should be installed in the original drilling direction.
Tooth surface should be removed every 10 days; and coated with smooth grease.
3. 4 smooth grease selection of slewing bearing smooth; due to more induction work elements; users can choose the best smooth grease according to specific requirements.
Recommend to friends comments close window

Bearing related knowledge
Spherical roller bearing device plan
NSK bearing oscillation and temperature discrimination bearing damage Joint bearing has the following characteristics: Deep groove ball bearing application protection and protection bearing Professor: Tips for rolling mill bearings must be steered and repaired

This article links to http://
Please indicate the bearing network http://

Previous: Viewing and fault handling in INA bearing operation: The type and use of reverse bearing
Race Number Bib

MULTIPURPOSE SPORTS BIBS: If you are arranging a sports event or marathon race in your local stadium, our multipurpose sports bibs would make a helpful addition. The bibs are used for the identification of the participant`s information. The number bibs are used for several outdoor/indoor activities, gymnastics, tryouts, marathon, and volleyball.

NUMBERICAL ORDER: Our race number bibs is provided in a numerical order, which allows a referee or game coordinator to assign the bibs to its players in a consecutive and numerical order. The dimensions of the bibs are estimated to be 8.25 inches width x 5.5 inches length.

PREMIUM MATERIAL: Ourmarathon bibs for sports are designed using pongee material that attributes to its water-proof, tear-proof, and lightweight properties.You can also write your information on the race bibs for miscellaneous purposes.

USE AND APPLICATION: The bibs allows you to use safety pins to secure the bibs to your athletic clothes

REUSABLE BIBS: The sports bibs are reusable and a sports participants can reuse them for other sports events.

Custom Race Number Bib,Official Competitor Bib Numbers,Tearproof Dupont Bib Numbers
Wintape Measuring Tape Company , https://www.wintapetape.com