KONE Elevator Spare Parts, KONE Elevator Parts, KONE Lift Spare Parts, KONE Lift Parts
KONE Oyj (officially typeset KONE and pronounced /koʊneɪ/), founded in 1910 and headquartered in Helsinki, Finland, is an international engineering and service company employing some 49,000 personnel worldwide. The firm is the 4th largest manufacturers of elevators and escalators worldwide, and also provides maintenance services and modernization. In addition, KONE builds and services automatic doors and gates. The company provides local service for builders, developers, building owners, designers and architects in 1,000 offices in over 50 countries.Since 1924, KONE has been owned by one of Finland's wealthiest families, the Herlin family. After Harald Herlin purchased the company in 1924, he served as its Chairman until 1941. Afterwards, his son, Heikki H. Herlin, took over his father's post from 1941–1987. Control of the company was then handed down to his son, Pekka Herlin, which he retained from 1987–2003. The current Chairman of KONE's Board of Directors from 2003 onwards is Antti Herlin, the son of Pekka Herlin.
In the Finnish language Kone means "machine" or "device".
In June 2013 the company launched a new high-rise elevator technology, called 'KONE UltraRope', which enables future elevator travel heights of 1 kilometre. The product is light due to its carbon fibre core and a high-friction coating. Because of these qualities, elevator energy consumption in high-rise buildings can be cut significantly.
The 'KONE EcoDisc motor', used for hoisting, reduces the amount of energy lost as heat. The motor control system and brakes make the elevator ride quiet and the design frees up space.
The 'KONE MonoSpace' for low- to mid-rise buildings is the world`s first machine-room-less elevator.The 'KONE EcoSpace' elevator is a machine-room-less traction elevator designed for low-rise buildings from 2 to 15 stories as an energy-efficient alternative to hydraulic elevators, and can fit in an existing hydraulic elevator hoistway. It is produced in a 150 feet per minute (0.76 m/s) speed, 200 feet per minute (1.0 m/s) and 350 feet per minute (1.8 m/s) variants.The 'KONE MiniSpace' elevator with a small machine room is often used in high-rise buildings.
'People Flow' is a registered trademark of KONE Corporation.
KONE Elevator Spare Parts, KONE Elevator Parts, KONE Lift Spare Parts, KONE Lift Parts CEP Elevator Products ( China ) Co., Ltd. , https://www.zjfullelevatorreplacement.com
Block magents
Grade: 35H, 38h, 40H, 42H, 45H
Popular used in linear motor.
The size of block magnets can be designed according to customers' requirement.
Mainly consider the following to select sintered NdFeB magnets:
Magnetism selection
As Hcj difference, NdFeB magnets have different limits on working temperature. The working temperature should be lower than the maximum working temperature of selected NdFeB magnets grade, in order to take the most use of sintered NdFeB advantages. In addition, as NdFeB manufacture features, the production cost is higher for the highest grade of each series material, and its performance price ratio is not high. Cost of highest grade material is generally 10-20% higher than the next grade. E.g. The Br of 48H is 4% higher than 45H, but its price is 20% higher. Therefore, we suggest you make appropriate selection. Please inquiry our experienced engineers once you have any doubts.
Size selection
Due to the fragile character of NdFeB magnet, so the ratio of length/Thickness can't be too big. Otherwise, the demagnetization ratio after aging will be higher, and the machining cost will be more. Meantime, we don't suggest design NdFeB products with very thin dimension which will leads to collision and damages. Usual Magnets should be designed with proper round edges.
Coating Selection
We have to do surface treatment and protection on magnets surface due to the restrictions of NdFeB material base. According to the factors such as working temperature, environment, corrosion resistance, product appearance, coating bonding, adhesive effect etc, we have to select different metal or nonmetal protective coatings. For more details please refer to the coating introduction on our websites or consult our professional engineer.
KONE UltraRope
KONE EcoDisc motor
Elevators
Other trademarks