In summer, due to the hot weather and the dryness of the weather, renovation projects usually give people a feeling of ease and ease of construction. However, some carelessness may lead to some undesirable factors. Therefore, the following conditions must be taken into account in summer construction. First, pay attention to material stacking, storage, purchase or finished products. Semi-finished wood, wooden floor or freshly painted furniture, do not rush to be exposed to the sun under the sun exposure, should be placed in a dry and ventilated place to dry naturally, otherwise the material is not only easy to deformation, cracking, but also affect the quality of construction. Second, pay attention to the treatment of the finished base, in particular, before pasting tiles, floor tiles, and wall surfaces, do not allow the bottom layer of the veneer to be too dry. Generally, first pour water on the surface and allow it to absorb about half an hour before reusing cement mortar. Or gypsum powder bottoming to ensure that the paste is solid. Third, pay attention to the maintenance of the aftermath, has been done in the cement, 107 plastic, or cement roof after the completion of the three or five days should be put some water every day to prevent cracking. Fourth, pay attention to the rational use of chemical products. Before construction, all products should be read in detail, such as instructions for chemical products such as glues, adhesives, paints, etc., must be constructed under the temperature and environment stated in the manual to ensure the stability of chemical product quality. Fifth, pay attention to site safety. With less clothing in the summer, the body is prone to sweat, and labor protection is required to enter the construction site. Bare feet make it easy to pierce the nails. Remember to power off the circuit when installing the circuit. Paint three trees paint cement paint furniture floor tiles tile adhesive floor tile Aluminum Precision Turned Parts 1. The hardness of the material is moderate, and the tool wear of the machining equipment and CNC machining center is small. Aluminum Precision Turned Parts,Aluminum Cnc Turning Parts,Aluminium Cnc Turning,Cnc Turning Aluminum Parts Stand Dragon Industrial Co., Ltd. , https://www.standdragontw.com
2. It can be precisely machined into various geometric shapes such as plane, cavity, shell, sphere, arc, and anisotropy.
3. It is not easy to stain and maintain. Aluminum precision parts, precision parts processing, CNC processing
4. It has good durability and is not easy to corrode. With special treatment process, the service life of parts is longer.
5. Aluminum is environmentally friendly and can be 100% recycled, with high recycling value.
The above five points are the material characteristics of aluminum products. Aluminum is a common material in CNC precision parts processing, with moderate hardness, durability and corrosion resistance. In addition, the cost of materials is appropriate. It is the preferred material for most parts manufacturers.