Panel furniture hardware is more popular among young people because of its moderate price, variety of styles, novel colors and not easy to deform. It is generally made of metal parts connected to the board, including boardboard, wood-based board, particle board, honeycomb board and so on. Luo Haiqing, director of the Wood Products and Furniture Hardware Laboratory of the Kunshan Inspection and Quarantine Bureau of Jiangsu Province, reminded consumers to remember to "see and ask" when purchasing panel furniture hardware. Concerned about surprises Tag: panel furniture hardware hardware accessories Previous: Hardware fingerprint lock agent pay attention to four points Next: China's bathroom hardware accessories short-lived mystery Control Valve,Flow Control Valve,Pressure Control Valve,Directional Control Valve LIANGGONG VALVE GROUP CO.,LTD , https://www.lgvalvegroup.com
"Wang" edge: From the edge of the panel furniture hardware, you can see the fineness of the product work, see if the edge is uneven or tilted. Brand plate furniture hardware products, the veneer has been fully processed, good edge banding, so that harmful gas diffusion to a minimum.
"Smell" smell: Free formaldehyde in panel furniture hardware may cause pollution to the living room air. When you buy it, you should open the door or drawer to smell it. If there is a pungent smell, it may be formaldehyde.
"Q" connector: To ask about the connection method of the dealer's furniture hardware connector, and check the connector, try to test whether the screw is firm, whether the switch can be free, whether there is noise, whether the surface coating is peeling off, etc. If it is an eccentric connecting piece, it depends on whether the connecting piece and the plate are finely cut.
“Cut†gap: Most of the panel furniture hardware sold on the market uses plywood. It can be seen from the side without any seams around the board surface. If there is a gap, the process is not well handled. The clearance of the movable part such as the door seam and the drawer joint is suitable as appropriate, such as a large gap, indicating that the work is rough, and the deformation will be long after a long time. 