Gate Valve Industrial gate valves are wildly used in all type of industrial pipelines, such as power stataion, petrochemical, natual gas,water treatment ect. Pressure Seal Gate Valve, Bolt Bonnet Gate Valve, High Pressure Gate Valve and API 602 Gate Valve with ASME & DIN & EN & GOST standard are commonly used by customer. Industrial gate valve we provided can cover size from 1/2 inch to 40 inch(DN15-DN1000) matching pressure from class 150 to class 3650(PN10-PN70 0) which are suitable for operating in the working media temperature from -196℃ to 693℃, as well as material in carbon steel, stainless steel, alloy steel and duplex steel in casting material or forging material. Gate Valve,Parallel Slide Gate Valve,Forged Gate Valve,Bw Gate Valve Yongjia South Trading Co.,Ltd , https://www.n-lvalve.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Common bearing anomalies Common bearing anomalies
Large metal noise cause 1: abnormal load; countermeasures: correction cooperation; discussion of bearing clearance; adjustment and load; correction of housing shoulder orientation. Reason 2: poor equipment; countermeasures: machining accuracy of shaft and outer casing; improvement of equipment precision, equipment Method. Reason 3: Lack of lubricant or unsuitable; Countermeasure: make up the lubricant; pick the right lubricant. Reason 4: Rotating parts have touch; Countermeasure: Correct the touch of the curved road seal. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Rule noise reason 1: Indentation, rust or scar on the rolling surface due to foreign matter; Countermeasures: replace the bearing; remove the relevant parts; improve the sealing equipment; use a clean lubricant. Cause 2: (after steel carburizing) appearance deformation; : Replace the bearing; pay attention to its application. Reason 3: Rolling surface peeling; Countermeasure: Replace the bearing.
Irregular noise cause 1: excessive clearance; countermeasures: study cooperation and bearing clearance; correct preload.
Cause 2: foreign matter intrusion; countermeasures: study and replace the bearing; remove the relevant parts; improve the sealing equipment; use clean lubricant.
Reason 3: Spherical injury, peeling; Countermeasure: Replace the bearing.
Abnormal temperature rise causes 1: excessive lubricant; countermeasures: reduce lubricant; excessive use; pick harder grease.
Reason 2: Lack of lubricant or unsuitability; countermeasures: make up the lubricant; pick the right lubricant.
Reason 3: Abnormal load; countermeasures: correct cooperation; discuss the clearance of the bearing; adjust the preload; correct the shoulder orientation of the outer casing.
Reason 4: Poor equipment; Countermeasures: Improve machining accuracy, equipment accuracy, and equipment methods for shafts and casings.
Reason 5: creep of the cooperation surface, conflict of sealing equipment is too large; countermeasures: replace the bearing; discuss cooperation; modify the shaft and outer casing; change the sealing method.
Large oscillation (bounce of the axis)
Cause 1: (after steel carburizing) appearance deformation; countermeasures: focus on bearing replacement operations.
Reason 2: Peeling; Countermeasure: Replace the bearing.
Reason 3: Poor equipment; countermeasures: Correct the right angle of the shaft, the outer shoulder of the shell, and the side of the liner.
Reason 4: foreign matter intrusion; countermeasures: replace the bearing; remove the parts; improve the sealing equipment.
The lubricant leaks too much; the cause of discoloration: excessive lubricant; foreign matter intrusion, foreign matter in the wear powder; countermeasures: excessive use of lubricants; research and conversion of selected lubricants; discussion of bearing replacement;
Recommend to friends comments close window Bearing related knowledge KOYO bearing inspection, temperature, application focus on imported bearing temperature view small common sense
INA bearing suffix meaning agricultural motor bearing overheating disposal method bearing heat treatment skills and equipment (4)
This article links to http://
Please indicate the bearing network http://
Previous: Common terms and definitions in the bearing industry (2)
Next: Installation of imported bearings, disassembly
Common bearing anomalies
Source: China Bearing Network Time: 2013-10-13