Don't look for it! The aluminum alloy door and window manufacturing process is here!

Since the size of each owner's room and the window opening area are different, the requirements for aluminum alloy doors and windows are different, so many customers' aluminum alloy doors and windows are made by order. So what is the manufacturing process and construction process of aluminum alloy doors and windows?

1, cutting material

Cutting material is the first process of aluminum alloy door and window production, and it is also a key process. The cutting material mainly uses cutting equipment. According to the design scheme of each measuring size, it can be accurately cut into corresponding sizes according to the design requirements. The error value of the breaking material size should be controlled within 2mm.

2, punching

The frame fan assembly of aluminum alloy doors and windows is generally screwed, so whether it is the assembly of the horizontal and vertical members or the fixing of the accessories, it is necessary to punch the holes at the corresponding positions. The punching of the profile requires accurate position. The punching cannot be changed repeatedly on the surface of the profile, because once the hole is formed, it is difficult to repair.

3, assembly

The profiles are assembled by screwing the connectors according to requirements. Aluminum alloy doors and windows are assembled in a 45° angle butt joint, a right angle butt joint and a vertical butt joint. The connection of the horizontal and vertical rods is generally fixed with special joints or aluminum angles, and then fixed with screws, bolts or aluminum rivets.

Aluminum alloy door and window accessories:

Aluminum alloy doors and windows require accessories. The general accessories are handles, locks, hinges, hinges, auxiliary supports, screws, etc.

The hardware accessories of aluminum alloy doors and windows can directly affect the service life of doors and windows.

Aluminum alloy doors and windows installation standards:

1. After the aluminum alloy sliding door and window are installed and fixed, the glass door sash is placed in the frame chute as a whole, and the gap between the fan and the fan can be adjusted.

2, aluminum alloy swing doors and windows in the frame and fan grid assembly on the wall, after installation and fixing, then the glass, that is, first adjust the gap between the frame and the fan, then the glass into the fan and adjust the position, and finally set the sealing strip And sealant.

Editor in charge: Xu Yuehua