A gabion is a cage, cylinder, or box filled with rocks, concrete, or sometimes sand and soil for use in civil engineering, road building, military applications and landscaping.
Gabion mesh is the wire material used to make gabion boxes and baskets. It is typically made of heavy galvanized steel or coated with PVC to resist corrosion. The mesh is woven into a hexagonal pattern to provide strength and flexibility.
Gabion mesh is a type of wire mesh that is used to build structures like retaining walls, erosion control barriers, and other similar structures. It is typically made of steel wire that is woven into a mesh pattern, and then filled with rocks or other materials to create a strong, durable structure. The mesh is designed to be strong enough to hold the weight of the materials inside, while also being flexible enough to conform to different shapes and sizes. Gabion mesh is often used in civil engineering projects, landscaping, and other construction projects. Gabion,Gabion Baskets,Gabion Box,Gabion Mesh Hebei Aibuer trading co., Ltd , https://www.ablewiremesh.com
Gabion baskets are wire containers made of hexagonal netting. The wire is double twisted and the mesh is reinforced by a wire border along the edges. The baskets are filled with stones and linked together to form a monolithic structure.
Gabion box, also known as a gabion basket, is a WIRE MESH container filled with stones or other hard materials. They are used in civil engineering projects to control erosion, stabilize soil, and create retaining walls.
Felt punching tips
In the mechanical assembly and repair work, often suffer from the need to find a suitable punch on the felt hole, here is a simple and practical punching method. After the punching position on the felt is determined, find a scrap piece with a hole (0.50~1.00mm larger than the diameter of the punched felt hole) according to the diameter of the punching hole, and align the punching position of the felt with the scrap hole, and then A steel ball with a diameter larger than the hole diameter of 5 to 10 mm is placed in the punching position of the felt (as shown in the figure), and the steel ball is smashed with a hammer to obtain a satisfactory small hole.