Tiles Tiles Tiles Home Decorations Home Decorations Decoration Decorations Floor Tiles Tiles Tiles Tiles Switches And Sockets,Multi Plug Socket With Switch,Remote Control Plug Socket,Electrical Sockets And Switches B-F-B-ic international Ltd.co , https://www.ledgather.com
Select tiles
In the selection of floor tiles, according to personal preferences and functional requirements of the room, according to the field layout, from the floor tile specifications, color, texture and other aspects of screening.
The color and style of the floor tiles should match the overall space color. At the same time in the selection of floor tiles should pay attention to six points: see whether the glazed pinholes, spots, glazed texture, with or without color; see whether the deformation of the tile, measure the two diagonal tiles are equal; see tile water absorption, With water droplets on the back of the brick, the smaller the diffusion area, the longer the drying time, the lower the water absorption rate, and the better the quality. When you listen to the sound and tap the tile, the sound becomes sharper and the quality is better. The weight and the weight are greater. The better the texture, the out-of-the-box inspection, the extraction of one box from each of the different boxes, and whether or not the size is the size of the box after it is tiled.
Installation tiles
Dry shop method: In theory, floor tiles should adopt dry shop method. After the base water is moistened, floating sand and debris are removed. Wipe the bonding layer, use one to three dry cement mortar, lay flat according to the horizontal line, put the brick on the mortar and use the rubber-coated hammer to shake, remove the floor tile and pour the cement slurry, and then put the floor tile to make it level . The dry paving method effectively avoids the occurrence of air bubbles and empty drums caused by the paving of the floor tiles. However, because the dry paving method of the ground tiles is relatively labor-intensive and has a relatively high technical content, the general dry paving method is better than the wet paving method. The cost of the law is much higher.
Wet-laying method: It is a method commonly used by many home improvement owners. The difference between this process and the dry-laying method is to replace one to three dry cement mortars with ordinary water and cement mortar. The tiled floor using the wet paving method may generate hollow drums and air bubbles, which may affect the service life of the tile. However, due to the ease of operation and low price of the wet paving method, many families still use the wet paving method to lay the ground.
Home improvement floor selection and installation summary
In modern living room design, tiles play an important role in decorative materials due to their waterproof, moisture-proof, wear-resistant, and easy-to-clean features. During the decoration process, how to choose and install the floor tiles is very important.