How to choose a good pot? Actually, it is a matter of magnitude or difficulty. In general, the selection criteria for teapots can be considered from four perspectives. Capacity size applies. There is a large gap between the size of the teapots, with a large number of liters of water, and the smaller ones are only a glass. People use big pots, people use little pots, and they have to grasp them well. The lid design is reasonable and the tea is easily accessible. Those who enjoy drinking oolong teas are dry and tight before being brewed. It is not difficult to put them into the pot by using tea. However, after brewing hot water, the leaves expand and expand one by one, and the whole pot will be The body is full and tight (especially when the amount of tea is too large). At this time, if the mouth of the pot is too small or the design is not appropriate, it will take some time to pull out the tea residue. If it is neglected and not cleared, tea scales may form on the inner wall of the pot body, and even mildew may form. The center of gravity must be steady, and the end must be smooth. Some teapots are very heavy at the end of their life. If the pot is not designed properly and does not meet ergonomics, it is too thick (with too much mud). When a novice buys a pot, you may wish to hold three-quarters of the water in the pot first, and then carry it by hand. In this case, try to measure whether it is too heavy. The second can be used to feel if the position of the finger and the handle is comfortable. It's very important whether you can get it right. The water should be smooth and the water must be decisive. This is not easy for most people who buy teapots. The pot water is vigorous and powerful, the arc is smooth, and the water beam is round and smooth. When water is cut off, it is ready to stop, simple and neat, does not drool, and there is no residual water left in the kettle after pouring. The craftsmanship is attentive. Zishahu is known for its highly sophisticated craftsmanship. Almost all good sand jugs are hand-formed. Even for the sake of production and normalization, the hand-dressing process is still It is quite tedious, so the level of craftsmanship is an important condition for judging the quality of sand pots. The process requirements of the sand pot basically have the following items: Mouth, button, handle, three points into a line. This is a point that many collectors have specifically paid attention to, especially the basic pots such as horizontal pots and Xishi pots. It seems simple, but it is not. Even including famous pots, there are still many sand potsæª æ–œ oblique. In addition, it is quite common that the top handle and the bottom handle are not on the same vertical line. Of course, such sand pots can be bubbled and raised, but the Chinese people pay attention to "large to medium positives", so unless it is specially designed sand pots, it should still be considered as appropriate. The lid must be tightly closed. The round jug must be able to rotate smoothly without hindrance, the square jug requires that the face seam be straight and not deformed, and the bead-grained device must reach the all-embracing “pass-through†stage. In addition to the above visual and hand tests, we can still hold the water in the pot, put the pot as a water injection, and hold the air hole, if you can reach the pressure and stop and the leak does not leak, it means that the lid and the body of the pot Very high degree of integration, very little contact with the outside air. Some potters with excellent technical skills can also reach the position where the pot can be lifted by hand when the spout is plugged. The body of the kettle is flat and the inner wall is clean and tidy, and the payment is clear and correct. In general, the merits and demerits of a sand pot can be judged from the appearance of the potter's heart with ulterior motives. Also, whether or not the pot is in a proper size, moderate position, and depth is an important reference. In addition, the most vulnerable to ignorance is whether the joints in the inner wall of the body of the kettle body are covered with construction debris or whether the inner wall and the inner bottom are perfectly picked up.... These small details are enough to see the author's production. The attitude is rigorous and prudent. The mud requirements are pure and the fire requirements are appropriate. Some sand pots are dark and unlit, but they are not raised first; others are light thief floating and different colors. These signs all indicate that the pot's mud is not pure or the author's mud is too bad. As to whether the sand pots are properly sintered? It takes cumulative experience to make the right judgment. Generally available lid (please do not use the lid edge, it is the most vulnerable place of the device) gently tap the pot body (please note, Mo sad pot table), if the sound of rhyme, indicates moderate fire If the sound of chaos is low, it represents a slight lack of fire; conversely, if there is a high-pitched sound, the table is over fire and the kettle has been porcelainized. Carefully choose true love should not be impulsive. The shape of the teapot is varied and varied, but the aesthetic standards vary according to each person's aesthetics. You love the fine description of the flower goods, I love the simple and generous light goods, who do not have to implicate who, so the shape of the sand pot is not good and bad can not be generalized. What is really important is that, in any case, buying a pot must not be an impulse for the author's fame or other people's strong advocacy, otherwise it will be easy to regret later. Because tea pots are the coolest and most objective times for human beings, the sand pots in their hands are bound to suffer from their most rigorous picky, which is why the teapot is like a woman's love complex - forever Less one. Although each person's aesthetics is different, the friend who enters this way can still follow the following two points for reference: The geometric shape of the sand pot, the circle must be round, the party's must square, when the line is straight, when the song is song. Do not choose to distort the mouthpiece, mouth, or tilt the mouth, because these will seriously affect the overall strength. In addition, the size of the parts of the device must be matched with the body of the device. It is not advisable to use large and inappropriate devices. Small eyes and small eyes should be avoided. Naturally shaped sand pots, the realistic ones must be realistic, and the freehand brushwork must be freehand. Due to the fact that many flower products are molded, they should be meticulously aware of them. There should be no sensation of bluntness, and care should be taken to ensure that there is no microscopic crack in the contact points between the body and the dough to avoid future breakage. The price is reasonable. After one of the aforementioned problems, the final question is "pot price geometry." In fact, in the past decade or so, the rise of the teapot has been overwhelming, and it has reached new heights. As far as the flow of the wind is concerned, it seems that the tea brewed from a pot of less than a thousand yuan is unbearable. What's more, the price of pots is still tens of thousands and millions, and it really fulfills the “human Zhu Yu An Fuchu, such as Yangshuo Xitou and a pill soil†contained in ancient books. All in all, when we are faced with an assortment of sand jars and shopkeepers’ tongues, we must clearly distinguish between “choosing a good pot recognized by others†and “choosing a good potâ€. . Because only the “fit for yourself†is the real good pot. If you just want to follow the flow and be elegant, you can lose the leisurely beauty of the tea art. Villa design owner 1. Features of tape measure Mini Steel Tape Measure,small metal tape measure,tape measure measurements Yucheng tengxu Measuring Tool Co., Ltd , https://www.hardwaretoolstape.com
The pot is a pot, practical first. Teapots are used to make tea, which of course is unquestionable. In other words, when choosing a teapot, it should not be contrary to the basic principle of “practicalâ€. A practical, helpful pot should have at least the following:
Gift rulers are used for advertising and promotion. They are divided into Steel tape (steel tape) and leather tape (PVC plastic fiber tape). They are usually cute and compact. Tape measures are also called measuring tools. Eighty-five percent of the world's tape measures are exported from China.
2, the characteristics of the tape measure
(1) The tape measure is too deformed and will not fail
Why didn't it fail? The spring in the tape measure is very long, and its range from completely relaxed to fully tightened is very large. The entire stroke of the tape measure includes it, and there is a margin at both ends, so the tape measure will not fail.
(2) Pull one meter long and pull two meters long, there is no difference in tension
The spring of the tape measure is very thin, and the amount of deformation when it is tightened is also small, so the reaction force is very small, and the force change is not felt when the rule is pulled.