The main purpose and scope of application of the shackle: The shackle can be used for the end fittings of the rigging, and is directly connected to the object to be lifted during the lifting operation. Shackles can be used between rigging and end fittings, only for connection. When the rigging is used in conjunction with the beam, the shackle can be used to connect the rigging with the lug plate at the lower part of the beam instead of the lifting ring, which is convenient for installation and disassembly. Shackles are widely used connection tools in lifting operations, and are mainly used for connection parts that are often installed and disassembled in hoisting. D-type shackle is mainly used for single-limb rigging; B-type shackle is mainly used for multi-limb rigging. The company can design and produce other types of stainless steel products according to customer requirements. The company has a number of professional precision casting production lines, CNC machining lines, and machining centers. It also owns advanced spectral analysis quality inspection equipment to ensure material quality. High-pressure pressure test leak detection equipment, air tightness detection equipment, angle test bench, national standard tooth gauge, ring gauge and optical gauge, solid melting furnace and other equipment, technical capabilities. Fangzheng Stainless Steel Rigging sincerely invites friends from all over the world to visit and negotiate with our company, and jointly develop the world rigging, marine hardware accessories, stainless steel pipe valve parts, and auto parts market. This product is made of stainless steel 304, 316.
Swage Terminals,Swage Eye Terminal,Swage Stud Terminal,Swage Fork Terminal Jiangsu Hongze Stainless Steel Wire Rope Co., Ltd , https://www.hzrope.com
KraussMaffei Germany to create the world's largest PP pipe production line
Recently, KraussMaffei company in Germany to create known as the world's first system, the company delivered a pipe extrusion line used to produce large, smooth, high density polyethylene (HDPE) pipe, said the pipe diameter up to 2400mm, And output 1700kg per hour. The PES company, a long-time customer of KraussMaffei, uses HDPE water pipes from KraussMaffei's single-screw extruder series for almost a decade, including pipes up to 1,600 mm in diameter. These large pipes will be produced in the Persian Gulf and are mainly used to power seawater desalination plants and cooling water refineries. In addition to the KraussMaffei single screw extruder, the system uses a screw distributor to run high melt strength polyethylene (PE) XLS12B supplied by Total Petrochemicals. A spokesman for KraussMaffei's public works department said he knew it was the world's first production line to produce smooth plastic pipes up to a diameter of 2,400 mm, breaking the previous 1,600-mm limit. This large tube extrusion line will facilitate PES's production of tubes with diameters ranging from 1800, 2000mm-2200mm, and 2400mm that are available in existing products. The system includes a KME150-36B / R single screw extruder and KM-RKWRKW40-2400 line inlet. This design uses the rheology of the material and the KraussMaffei calibration system. Save on material by reducing wall thickness changes. This consistency is more conducive to uniform pipe size, to ensure that the installation of sealed connections.