Liquid Paint for Building Non-Solidify Rubber Bitumen Waterproof Coating

Model NO.: CL-C

Certification: ISO9001

Substrate: Concrete Surface

Components: Film Forming Matter

Formation Mechanism: Non Conversion Type

Solid Content: 98%

Low Temperature Flexibility: -25degree Centigrade, No Crack

Self Healing: No Water Penetration

Thermostability: 80 Degree Centigrade, No Slip,No Flow,No Drip

Anti-Water Breakthrough 0.6MPa: No

Characteristic: Creep Property, Bonding Perpormance, Self-Healing

Trademark: nuode jinlong

Transport Package: Metal Bucket

Specification: 20kg

Origin: China

HS Code: 3824999990

liquid paint for building non-solidify
rubber bitumen waterproof coating

Â

Â

liquid paint for building non-solidify rubber bitumen waterproof coating

Â

Non-cured rubberizedÂ bitumen waterproofing coating is the new waterproofing material which is newly developed by our company.This product is one-component waterproofing coating be made by some modified materials,it is composed of rubber powder,high polymer and bitumen etc.

liquid paint for building non-solidify rubber bitumen waterproof coating

Non-cured rubberizedÂ bitumen waterproofing coating has the outstanding creep properties,good waterproofing performance and aging resistance.Applying of this product including plastering,spraying or slip casting etc.This coating can be used to made composite waterproofing membrane with others membrane and also using for a independent waterproofing layer.

Feature:

Excellent creep property

Good bonding performance

Excellent self-heating property

Excellent wet construction at the grassroots level

Excellent resistance to chemical corrosion resistance and aging resistance

Superior environment performance

liquid paint for building non-solidify rubber bitumen waterproof coating

Use Scope:

Waterproofing of roofs

Waterproofing of balconies,terraces and verandas

Waterproofing of wet areas(under-tile)in bathroom,kitchens,balconies,auxiliary rooms,etc.

Waterproofing of green roofs,flowerbeds,planter boses

Waterproofing of old bitumen felts,asphalt felts,EPDM and PVC membranes and old acrylic coatings.

Protection of Polyurethane Foam Insulation

Waterproofing and protection of Concrete constructions like Bridge-decks,tunnels,stadium stands,car parks,etc.

Â

Construction Points:

Â

liquid paint for building non-solidify rubber bitumen waterproof coating

- Clean up the grass -roots
When the surface of the grass-roots level obviously uneven is suitable to use cement mortat screeding; Through the pipline of the waterproof layer,embedded parts and equipment foundation shall be buried bedore the waterproof layer construction and installation.The gaps between the popline and structure should plugging tightly of fine stone concrete or polymer waterproof mortar. Use a broom or hair drier to clean up grass-roots mortar and construction waste. Acceptance of the basic level should smooth, solid, drainage slope comply with the design requirements, grass-roots level can be wet but can not have water on the surface.

- Detail parts additional layer construction
The place such as roof rainwater mouth, the roof tube root, the inside and exposed corner of parapet and gutter firstly blade coating 1mm non-cured rubberized asphalt waterproof coating to make strengthen.

-Â Coating construction
Coating can choose blade coating or spray coating construction, open extrusion pump, to squeeze non-cured rubberized asphalt waterproof coating to the grass-roots,blade coating evenly and full coating not exposed base,coating thickness according to the design requirements.

- Pave coil
Then paving the coiled material to waterproof coating surface that has completed the construction, it should laid straight,smooth,no wrinkle. Coiled material lap width is 100mm, overlapping parts adopt cold stick form, then blade coating or spray coating non-cured rubberized asphalt waterproof coating on coil lap width range, no need table dry time, can be directly construction overlapping parts of the coil, and rolling.
Â
- Water-storing test
After the completion of the waterproof layer, water storage experiment was carried out in accordance with the regulation. Storage 24 hours no leakage water is qualified.
- The construction of protective layer

The quality of roof waterproof layer can be qualified acceptance, protective layer construction can be going. According to design requirements do the corresponding concrete, block material ot cement mortar layer.

Â

liquid paint for building non-solidify rubber bitumen waterproof coating
Packing:
MetalÂ bucket. Â 20KG per bucket

Sorage:

Store coatings in a cool location that does not freeze. We recommend using coatings within one year.
Always stir well before use.

If the water and solids have separated and do not easily combine into a creamy heavy-paint consistency, discard the coating.

Contact information:

Company profile:
Nuode Jinlong offers a range of high quality waterproofing solution-based products especially foe the prefessional .Our main products including:

SBS/APP modified bitumen waterproofing membranes

Self adhesive bitumen waterproofing membranes

Self adhesive bitumen flashing tape

Self adhesive butyl waterproofing tape

PVC/TPO/HDPE/EVA waterproofing membranesÂ

Polymer compound waterproofing membranes

Liquid bitumen coating

Our company also export Dimple drainage board, Non woven polyester mat and Glassfiber mesh compound mat for bitumen membranes,Glassfiber mesh,Modified bitumen membrane production lines,etc.

Kitchen Accessories
Glass rinser ,Glass washer
JIAHAOJIA SANITARY WARE INDUSTRY CO., LTD. , https://www.gagalfaucet.com