Dosing and Metering Pumps Characteristic :
1 Clean and pollution-free: fluid only passes through and touches the Peristaltic Pump hose.
Dosing And Metering Pumps,Programmable Peristaltic Pump,Water Treatment Pump,Laundry Detergent Pump Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crprecisionpumps.com
Address: 121 Wutong Street, High-tech Zone, Zhengzhou City, China Post Code: 450001
Contact: Zhang Liang Telephone/Fax Email:
annex:
1, "Ultra-abrasive grain size inspection" national standard consultation draft and preparation instructions
2, Feedback form
June 12, 2015
3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.
4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.
5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.
6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.
7. It has the function of a shut-off valve, does not siphon, has no seals, and has the functions of a shut-off valve and a check valve.
8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.
9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.
Notice on Soliciting Opinions on the National Standard for Superhard Abrasive Particle Size Inspection
Abstract The draft of the National Standards for Superhard Abrasive Particle Size Inspection has been drafted by the Standard Working Group. It has been reviewed and approved by the Secretariat of the National Abrasives Standardization Technical Committee and is now widely consulted by the society. The deadline is July 31, 2015. . If you have any comments, please...
The draft of the National Standards for Superhard Abrasive Particle Size Inspection has been drafted by the Standard Working Group. It has been reviewed and approved by the Secretariat of the National Abrasives Standardization Technical Committee. It is now widely consulted by the society. The deadline is July 31, 2015. If you have any comments, please fill out the “Feedback Form†and send it to the Secretariat of the Standards Committee by mail, fax or email. National Abrasives Standardization Technical Committee Secretariat