Polyvinyl chloride (PVC) Anti-corrosion tape, also known as PVC outer protective tape, is mainly used for anti-corrosion protection of various pipes. Pvc Anti-Corrosion Tape,Anti Corrosion Tape,Anti Rust Tape,Denso Anti Corrosion Tape Inner Mongolia Overseas.Trade co.,LTD , https://www.flangevalvejoint.com
Polyvinyl chloride (PVC) anti-corrosion tape adopts polyvinyl chloride resin, plasticizer, stabilizer and other auxiliaries. The base rubber is compounded on it. Polyvinyl chloride (PVC) has good mechanical properties and anti-corrosion properties. It is easy to wind. It is suitable for low temperature conditions, and is also suitable for elbows and irregular surfaces. It is widely used in ordinary steel pipes. , galvanized pipe, stainless steel pipe; anti-corrosion of air-conditioning pipeline.
Polyvinyl chloride (PVC) anti-corrosion tape is mainly used for anti-corrosion insulation and protective layer of buried steel pipes, or for cable winding anti-corrosion and other different purposes.
Main features of polyvinyl chloride (PVC) anti-corrosion tape:
1. Has good physical and mechanical properties.
2. Good air tightness and electrical insulation.
3. Good resistance to chemical media such as acid, alkali, salt, oil, etc.
4. Has good flame retardant, anti-mildew properties and good weather resistance.
Main parameters of the product
Thickness range: 0.15mm - 3.0mm;
Width range: 50mm - 750mm;
Product color: black, white, blue, etc.;
Length of each roll: 20m, 25m, 30m, 50m;
Pneumatic double diaphragm pump applications
With the rapid development of all walks of life in our country, many fields have undergone tremendous changes, but in some areas we still have no way to do more hello handling, such as in the harsh areas such as construction Due to the large amount of impurities and complex components in the sewage, the pipeline is easy to be blocked, so that the electric pump will be overloaded with the load, and the motor will be heated and easily damaged. Thanks to the birth of the pneumatic double diaphragm pump, we have solved this problem very well by using particles with adjustable flow rates and stopping automatically when the pipe is blocked. Pneumatic Double Diaphragm Pump Applications Diaphragm pumps have been invaded another market since its inception. Such as: paint, diaphragm pumps in the ceramic industry has occupied an absolute dominance, while in other industries, such as environmental protection, wastewater treatment, construction, sewage, fine chemicals is expanding its market share, and has other pumps irreplaceable Position. Pneumatic double diaphragm pump applications are: 1, due to the use of air as power, so the flow rate with the back pressure (outlet resistance) changes and automatically adjust, suitable for medium and high viscosity fluid. Centrifugal pump operating point is set on the basis of water, if used for slightly higher viscosity fluid, you need to support reducer or inverter, the cost has greatly improved, the same is true of the gear pump. 2, in a flammable and explosive environment with pneumatic pump reliable and low cost, such as fuel, gunpowder, explosives, because: First, the ground is not likely to spark; second, no heat during work, the machine is not Will overheat; thirdly, the fluid will not overheat because the diaphragm pump agitates the fluid to a minimum. 3, poor construction sites, such as construction sites, industrial and mining wastewater discharge, due to the impurities in the sewage and the composition of complex, easy to plug the pipeline, so the formation of the pump on the load is too high, the motor heat vulnerable. Pneumatic diaphragm pump through the particles and the flow rate can be adjusted, the pipeline automatically stop blocked to patency. 4, the other diaphragm pump is small and easy to move, do not need the foundation, accounting for the ground is extremely small, easy and economical installation. Can be used as mobile material transfer pump. 5, in a hazardous, corrosive material handling, diaphragm pump can be completely separated from the outside world. Pneumatic double diaphragm pump is in some experiments to ensure that no impurities contaminated raw materials. Can be used to transport the chemical properties of relatively unstable fluids, such as: photographic materials, flocculation and so on. This is because diaphragm pumps have low shear forces and little physical impact on the material. With the rapid development of science and technology, the future of double pneumatic diaphragm pump is also more bright. But this also requires the joint efforts of all circles.