Renovation is a big project. Everyone will be more or less DIY to add icing on the cake, which can save some money and increase fun. However, I am afraid that only a handful of DIYs come to my house. In fact, my home DIY began with water and electricity. The reason why I have this kind of courage is that the first time I learned electronics, and the second reason was that the first time I was renovated, the master of hydropower said a word, “PPR pipe is the simplest. People will install it. Fortunately, it costs 1,500 yuan for tools and materials to complete the use of hydropower. The minimum cost for water and electricity for people on the same side of this unit is 4000+, and the most outrageous one is 8000-. When I chat together, I dare not say how much I spent. A good start drew my head and closed the balcony and the bricklayer. I never asked anyone again. Think carefully, the door and the door cover are custom-made, and the full set of kitchen and toilet is custom-made. Large lockers It is custom-made, ceiling is only part of the corner, in addition to painters, other materials are not arrived at the artificial. When people are invited again, it is as if the supermarket is 1.5 kilometers away from their home. Click to view details: http://bbs.suzhou.shtuangou.com/dispbbs_0_647240_1.html Entrance decoration children's room decoration paint kitchen and toilet ceiling storage cabinet The utility model discloses a Kitchen Shower head that is convenient to switch the water outlet mode, has a compact structure, and is easy to use, and a kitchen faucet using the kitchen shower head. , The shower head is provided with a water separator, and the water separator is provided with an annular flow channel and an inner flow channel respectively connected to the spray water outlet body and the V-shaped water outlet body, and the lower end of the outer wall of the water separator is upwardly circular A plurality of water inlet holes connected to the annular flow channel are provided, and a first sealing ring is provided on the lower side of the water inlet hole; the water outlet end of the shower body is connected with a converter, and the converter is provided with a communicating In the water diversion cavity at the water outlet end of the shower body, the lower end of the water diversion device is installed in the water diversion cavity and can move up and down, and the upper end of the inner wall of the water diversion cavity is provided with a convex ring matching the first sealing ring, so The bottom surface of the water diversion cavity is provided with a sealing gasket that can seal the inner flow channel. Waterfall Shower Head,Overhead Shower Head,Push Button Hand Shower,Brushed Nickel Sink Faucet Yuyao Zelin Sanitary Ware Co., Ltd , https://www.kitchen-sinkfaucets.com