Solid wood furniture is generally high in price, and it is a symbol of grade and identity in the minds of many consumers, but now many consumers cannot distinguish the difference between solid wood furniture and general panel furniture , and it is not clear how to buy real furniture Good quality solid wood furniture. In fact, experts tell us that as long as you follow the ten steps below, everything will become very simple. 1. Determine whether the furniture is really made of solid wood. One of the secrets of judging whether solid wood furniture is: wood grain and scars. For example, a cabinet door looks like a pattern on the outside, then look at the corresponding pattern on the back of the door corresponding to the position where the pattern changes. If it corresponds well, it is a solid wood cabinet door. In addition, looking at the scar knot is also a good way to identify pure wood: look at the location of the side with the scar, and then look for the corresponding pattern on the other side. 2. Determine what kind of tree is made of solid wood. This directly affects price and quality. Ordinary solid wood furniture usually uses beech, white oak, ash, elm, catalpa, rubber wood, oak wood, while the precious mahogany furniture mainly uses rosewood, chicken wing wood, rosewood wood. The market for solid wood furniture is quite chaotic. Things that are sub-optimal and confusing tree species often appear. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is increasing day by day. It is absolutely cheap to be fraudulent. 3. Observe the advantages and disadvantages of wood. Open the furniture cabinet door and drawer, and observe whether the wood is dry and white, and whether the texture is tight and delicate. If there is furniture made of chipboard, density board and primary molding board, open the cabinet door or drawer and smell to see if there is an irritating smell. 4. Observe the wood for defects. The main load-bearing parts of furniture, such as uprights and load-bearing horizontal bars connecting the uprights, should be free of large knots, cracks or cracks. The structure is firm, the frame must not be loose, and the tenon and material are not allowed to be broken. The parts of the artificial board used on the furniture should be edge-sealed, and the installation of various accessories must be indispensable, missing nails, and through nails. 5. Observe the board strength. The board emphasizes that you can press with your fingers to feel the fastness of the board. One side of the material should be fixed with a cross-shaped skeleton. If the skeleton is sparse, the surface will feel unreal and the panel will vibrate greatly; the drawer bottom plate should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered, with a large area The partition should be made of five-layer board. Cabinet doors and drawer switches should be flexible. When the panel is covered with thin wood and other materials, the color and luster of the complete set of products should be similar. 6. Check stability and safety. Observe whether the drawer or door frame is tilted, whether the position of the tenon is distorted or the eye is too large, the tenon is not strict, and the parts caused by low process level are skewed. Wooden furniture must have safety and stability. When the two cabinet doors are opened 90 degrees, gently pull forward by hand, the cabinet body cannot automatically tilt forward; the glass of the bookcase door must be edged; the dressing mirror and The backboard should be installed on the dressing table, and the glass surface should be fixed by the bead. Individual parts of furniture (such as legs, drawers, cabinet doors, or brackets, etc.) must support enough. You should nudge the upper corner of the furniture or sit on the side to try to see if the furniture is firm. 7. Check the interface. It is better to choose dovetail joint or butterfly joint. The heavier furniture should be protected with screws at the corners and glued well. As for the position of the back plate, it must also be checked whether it is fitted and the screws are fitted. 8. Check the drawer slides and latches. The drawer should be solid and firm, and tighten the screws inside. May wish to pull open the drawer, movable table, cabinet door and other parts to ensure that it can be used freely and connected correctly. 9. Check the surface. Put your hand on the surface of the furniture, and carefully check whether the polished surface is smooth, especially to avoid whether the legs and other parts are rough, whether the paint is streaked, whether the corner paint is too thick, whether there are cracks or bubbles. 10. Turn the furniture upside down. Turn the chair and cushioned furniture upside down and see how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges? Is the batten tightly connected to the cross block? There is no excess glue and filler in the seam. Expanded Ptfe Tubes,Ptfe Thread Seal Tape,Ptfe Tape For Pipe Fitting,Joint Sealant Expanded Ptfe Cixi Congfeng Fluorine Plastic Co.,Ltd , https://www.cfptfeseal.com
I hope that the above ten pieces of information can bring convenience to users who purchase solid wood furniture. If you have any requirements, you may wish to store them for easy viewing in the future.
Ten tips for buying solid wood furniture
Â